| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000001HV9N |
| Model Year Start: 2020 | Model: GR Corolla | Prod Date Range: [03/2019 - 09/2022] |
| Title: EXTERIOR PANELS / TRIM: FRONT BUMPER (for Sedan without Illumination): DISASSEMBLY; 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 09/2022] | ||
DISASSEMBLY
PROCEDURE
1. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET (w/ Bracket)
|
(a) Remove the 2 screws. |
|
(b) Disengage the 2 claws and guide as shown in the illustration to remove the front bumper extension mounting bracket.
|
Remove in this Direction |
2. REMOVE NO. 3 RADIATOR TO SUPPORT SEAL
|
(a) Disengage the claw to remove the No. 3 radiator to support seal. |
|
3. REMOVE NO. 2 RADIATOR TO SUPPORT SEAL
HINT:
Use the same procedure as for the No. 3 radiator to support seal.
4. REMOVE INNER RADIATOR GRILLE
|
(a) Disengage the 2 guides. |
|
(b) Remove the 2 screws and 4 clips.
|
Screw |
|
Clip |
|
(c) Remove the 5 screws. |
|
(d) Disengage the 11 claws to remove the inner radiator grille.
5. REMOVE HOOD TO FRONT END PANEL SEAL
|
(a) Disengage the 9 clips to remove the hood to front end panel seal. |
|
6. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Pre-collision System)
Click here
![2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022]; CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: REMOVAL+](/t3Portal/stylegraphics/info.gif)
7. REMOVE FRONT BUMPER PAD
|
(a) Remove the front bumper pad. HINT: Use the same procedure for the RH side and LH side. |
|
8. REMOVE LOWER SIDE RADIATOR GRILLE LH (w/ Cover)
(a) Disengage the 2 claws and guide as shown in the illustration.
|
*a |
Hook |
|
|
Remove in this Direction |
(b) Disengage the hook to remove the lower side radiator grille LH.
9. REMOVE FRONT BUMPER HOLE COVER LH (w/ Cover)
(a) Disengage the 2 claws and guide as shown in the illustration.
|
*a |
Hook |
|
|
Remove in this Direction |
(b) Disengage the hook to remove the front bumper hole cover LH.
10. REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY
|
(a) Remove the 4 screws. |
|
(b) Disengage the 16 claws and guide to remove the lower radiator grille sub-assembly.
11. REMOVE RADIATOR GRILLE
(a) Disengage the 10 claws to remove the radiator grille.
12. REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM (w/o Pre-collision System)
|
(a) Disengage the 4 claws and guide to remove the radiator grille (or front panel) emblem. |
|
13. REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM (w/ Pre-collision System)
|
(a) Remove the screw. |
|
(b) Disengage the 4 claws and guide to remove the radiator grille (or front panel) emblem.
14. REMOVE FRONT BUMPER MOULDING
|
(a) Remove the 6 screws. |
|
(b) Disengage the 14 claws to remove the front bumper moulding.
15. REMOVE FOG LIGHT COVER LH
|
(a) Remove the clip. |
|
|
(b) Disengage the 2 claws and guide to remove the fog light cover LH. |
|
16. REMOVE FOG LIGHT COVER RH
HINT:
Use the same procedure as for the LH side.
17. REMOVE PIN HOLD CLIP
(a) Disengage the 4 claws as shown in the illustration to remove the 2 pin hold clips.
|
|
Remove in this Direction |
HINT:
Use the same procedure for the RH side and LH side.
18. REMOVE FRONT FENDER LINER RETAINER
(a) Remove the 2 front fender liner retainers as shown in the illustration.
|
|
Remove in this Direction |
HINT:
Use the same procedure for the RH side and LH side.
19. REMOVE FRONT BUMPER SIDE SUPPORT LH
|
(a) Remove the bolt. |
|
(b) Disengage the clip and claw as shown in the illustration to remove the front bumper side support LH.
|
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
20. REMOVE FRONT BUMPER SIDE SUPPORT RH
HINT:
Use the same procedure as for the LH side.
21. REMOVE NO. 2 LOWER FRONT BUMPER RETAINER
|
(a) Disengage the claw to remove the No. 2 lower front bumper retainer. |
|
22. REMOVE FRONT BUMPER ENERGY ABSORBER
(a) Disengage the 4 guides as shown in the illustration to remove the front bumper energy absorber.
|
|
Remove in this Direction |
23. REMOVE FRONT BUMPER REINFORCEMENT
|
(a) Disengage the 2 clamps. |
|
(b) Remove the clip.
(c) Remove the 8 bolts.
|
|
Remove in this Direction |
(d) Disengage the guide as shown in the illustration to remove the front bumper reinforcement.
24. REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH
|
(a) Disengage the 2 clamps. |
|
(b) Remove the 4 bolts and front side member bracket sub-assembly LH as shown in the illustration.
|
|
Remove in this Direction |
25. REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH
(a) Remove the 4 bolts and front side member bracket sub-assembly RH as shown in the illustration.
|
|
Remove in this Direction |
26. REMOVE LOWER FRONT BUMPER ABSORBER
(a) Disengage the 2 guides as shown in the illustration to remove the lower front bumper absorber.
|
|
Remove in this Direction |
27. REMOVE NO. 2 FRONT BUMPER REINFORCEMENT
(a) Remove the 2 nuts and No. 2 front bumper reinforcement as shown in the illustration.
|
|
Remove in this Direction |
28. REMOVE FRONT BUMPER BRACKET LH
(a) Remove the 4 bolts and front bumper bracket LH as shown in the illustration.
|
|
Remove in this Direction |
29. REMOVE FRONT BUMPER BRACKET RH
HINT:
Use the same procedure as for the LH side.
|
|