Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001HUAE |
Model Year Start: 2020 |
Model: GR Corolla |
Prod Date Range: [03/2019 - 11/2022] |
Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Radio Receiver Power Source Circuit; 2020 - 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 11/2022] |
Radio Receiver Power Source Circuit
|
DESCRIPTION
This is the power source circuit to operate the radio and display receiver assembly.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
Inspect the fuses for circuits related to this system before performing the following procedure.
PROCEDURE
1.
|
CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY POWER SOURCE)
|
(a) Disconnect the I55 and I56 radio and display receiver assembly connectors.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
I55-1 (GND1) - Body ground
|
Always
|
Below 1 Ω
|
(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Tester Connection
|
Condition
|
Specified Condition
|
I55-4 (+B1) - I55-1 (GND1)
|
Always
|
11 to 14 V
|
I55-15 (ACC1) - I55-1 (GND1)
|
Ignition switch to ACC
|
11 to 14 V
|
I56-19 (IG) - I55-1 (GND1)
|
Ignition switch to ON
|
11 to 14 V
|
NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR
|
|