Last Modified: 07-31-2024 |
6.11:8.1.0 |
Doc ID: RM100000001HUAA |
Model Year Start: 2020 |
Model: GR Corolla |
Prod Date Range: [03/2019 - 11/2022] |
Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Reverse Signal Circuit; 2020 - 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 11/2022] |
DESCRIPTION
for CVT
-
The radio and display receiver assembly receives a reverse signal from the park/neutral position switch assembly.
for M/T
-
The radio and display receiver assembly receives a reverse signal from the back-up light switch assembly.
WIRING DIAGRAM
PROCEDURE
(a) Move the shift lever to R and check if the back-up lights come on.
OK:
The back-up lights come on.
OK
|
|
|
2.
|
CHECK HARNESS AND CONNECTOR (REVERSE SIGNAL)
|
(a) Disconnect the I55 radio and display receiver assembly connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Tester Connection
|
Condition
|
Specified Condition
|
I55-28 (REV) - Body ground
|
Ignition switch to ON
Shift lever in R
|
11 to 14 V
|
I55-28 (REV) - Body ground
|
Ignition switch to ON
Shift lever not in R
|
Below 1 V
|
NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR
|
|