Last Modified: 07-31-2024 |
6.11:8.1.0 |
Doc ID: RM100000001HU99 |
Model Year Start: 2020 |
Model: GR Corolla |
Prod Date Range: [03/2019 - 11/2022] |
Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Touch Panel Switch does not Function; 2020 - 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 11/2022] |
Touch Panel Switch does not Function
|
CAUTION / NOTICE / HINT
NOTICE:
-
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.
Click here
-
When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
-
A communication malfunction DTC may be stored.
-
The radio and display receiver assembly may not operate normally.
PROCEDURE
(a) Check if there is any foreign matter caught between the display and exterior frame of the multi-display.
OK:
No foreign matter is caught between the display and exterior frame of the multi-display.
HINT:
-
If there is foreign matter between the display and exterior frame of the multi-display, the touch panel will remain pressed, preventing touch switch operation.
-
Turn the ignition switch to ACC or to ON with your hand touching the operating section, non-response may occur.
NG |
|
REMOVE FOREIGN MATTER
|
OK
|
|
|
(a) Check for foreign matter on the display.
OK:
The display is clean.
NG |
|
CLEAN DISPLAY AND RECHECK TOUCH PANEL
|
OK
|
|
|
3.
|
CHECK TOUCH SWITCH (OPERATION CHECK)
|
(a) Enter the "Touch Switch Check" screen. Refer to Check Touch Switch in Operation Check.
Click here
|
|
(b) Touch the display in the area where the switch malfunction occurs.
OK:
A "+" mark appears at the touched position.
|