Last Modified: 07-31-2024 |
6.11:8.1.0 |
Doc ID: RM100000001HTOH |
Model Year Start: 2020 |
Model: GR Corolla |
Prod Date Range: [03/2019 -
] |
Title: LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY (for Sedan): INSTALLATION; 2020 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - ] |
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
-
Use the same procedure for the RH side and LH side.
-
The following procedure is for the LH side.
PROCEDURE
1. INSTALL REAR COMBINATION LIGHT CORD
(a) Engage the grommet to install the rear combination light cord.
(b) Connect the connector.
(c) Return the luggage compartment trim cover assembly to its original position as shown in the illustration.
|
Install in this Direction
|
(d) Install the luggage compartment trim cover assembly with the 3 clips.
2. INSTALL REAR COMBINATION LIGHT ASSEMBLY
(a) for Bulb Type Rear Side Marker Light:
|
Install in this Direction
|
(1) Connect the connector.
(2) Turn the rear combination light cord with the rear turn signal light bulb as shown in the illustration to install them as a unit.
(3) Turn the rear combination light cord with the rear side marker light bulb as shown in the illustration to install them as a unit.
(b) for LED Type Rear Side Marker Light:
|
Install in this Direction
|
(1) Connect the 3 connectors.
(2) Turn the rear combination light cord with the rear turn signal light bulb as shown in the illustration to install them as a unit.
(c) Engage the clamp.
(d) Engage the 3 guides and pin to temporarily install the rear combination light assembly as shown in the illustration.
*a
|
Pin
|
*b
|
Guide
|
|
Install in this Direction
|
(e) Install the rear combination light assembly with the 2 screws.
(f) Remove the protective tape.
3. INSTALL REAR COMBINATION LIGHT COVER
(a) for TMC Made:
(1) Engage the guide and 2 claws as shown in the illustration.
|
Install in this Direction
|
(b) for TMMMS Made:
(1) Engage the 2 claws as shown in the illustration.
|
Install in this Direction
|
(c) Engage the 3 claws to install the rear combination light cover as shown in the illustration.
|
Install in this Direction
|
|