Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001HS28
Model Year Start: 2020 Model: Corolla Hatchback Prod Date Range: [03/2019 - 09/2019]
Title: M20A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION; 2020 MY Corolla Corolla Hatchback [03/2019 - 09/2019]

INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

The engine assembly with transaxle is very heavy. Be sure to follow the procedure described in the repair manual, or the engine lifter may suddenly drop.

NOTICE:

When the manual transaxle assembly is removed, be sure to use a new clutch release cylinder with bearing assembly and new installation bolts. Removal of the manual transaxle assembly allows the compressed clutch release cylinder with bearing assembly to return to its original position. Dust from the moving section may damage the seal of the clutch release cylinder with bearing assembly, possibly causing clutch fluid leaks.

HINT:

Perform "Inspection After Repair" after replacing the engine assembly.

Click here 2019 - 2020 MY Corolla Corolla Hatchback [06/2018 - 09/2019]; M20A-FKS (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION

PROCEDURE

1. INSTALL ENGINE HANGER

Click here 2020 MY Corolla Corolla Hatchback [03/2019 - 09/2019]; M20A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+

2. REMOVE ENGINE FROM ENGINE STAND

(a) Remove the engine assembly from the engine stand.

3. INSTALL COMPRESSOR ASSEMBLY WITH PULLEY

Click here 2019 - 2025 MY Corolla Corolla Hatchback [06/2018 -        ]; HEATING / AIR CONDITIONING: COMPRESSOR (for M20A-FKS): INSTALLATION+

4. INSTALL GENERATOR ASSEMBLY

  • for Transaxle M/T with Denso Made Generator:

    Click here 2020 - 2022 MY Corolla Corolla Hatchback [01/2019 - 09/2022]; M20A-FKS (BATTERY / CHARGING): GENERATOR (for Transaxle M/T with Denso Made Generator): INSTALLATION+

  • for Transaxle CVT with Denso Made Generator:

    Click here 2020 - 2022 MY Corolla Corolla Hatchback [01/2019 - 09/2022]; M20A-FKS (BATTERY / CHARGING): GENERATOR (for Transaxle CVT with Denso Made Generator): INSTALLATION+

  • for VALEO Made:

    Click here 2020 - 2022 MY Corolla Corolla Hatchback [03/2019 - 09/2022]; M20A-FKS (BATTERY / CHARGING): GENERATOR (for VALEO Made): INSTALLATION+

5. INSTALL V-RIBBED BELT

Click here 2020 - 2025 MY Corolla Corolla Hatchback [01/2019 -        ]; MAINTENANCE: M20A-FKS DRIVE BELT: INSTALLATION+

6. INSTALL NO. 1 CRANKSHAFT POSITION SENSOR PLATE

Click here 2019 - 2023 MY Corolla Corolla Hatchback [06/2018 - 11/2022]; M20A-FKS (ENGINE MECHANICAL): REAR CRANKSHAFT OIL SEAL: INSTALLATION+

7. INSTALL DRIVE PLATE AND RING GEAR SUB-ASSEMBLY (for CVT)

Click here 2019 - 2023 MY Corolla Corolla Hatchback [06/2018 - 11/2022]; M20A-FKS (ENGINE MECHANICAL): REAR CRANKSHAFT OIL SEAL: INSTALLATION+

8. INSTALL FLYWHEEL SUB-ASSEMBLY (for Manual Transaxle)

Click here 2019 - 2023 MY Corolla Corolla Hatchback [06/2018 - 11/2022]; M20A-FKS (ENGINE MECHANICAL): REAR CRANKSHAFT OIL SEAL: INSTALLATION+

9. INSTALL CLUTCH DISC ASSEMBLY (for Manual Transaxle)

Click here 2019 - 2022 MY Corolla Corolla Hatchback [06/2018 - 09/2022]; CLUTCH: CLUTCH UNIT (for EG60): INSTALLATION+

10. INSTALL CLUTCH COVER ASSEMBLY (for Manual Transaxle)

Click here 2019 - 2022 MY Corolla Corolla Hatchback [06/2018 - 09/2022]; CLUTCH: CLUTCH UNIT (for EG60): INSTALLATION+

11. INSPECT AND ADJUST CLUTCH COVER ASSEMBLY (for Manual Transaxle)

Click here 2019 - 2022 MY Corolla Corolla Hatchback [06/2018 - 09/2022]; CLUTCH: CLUTCH UNIT (for EG60): INSTALLATION+

12. INSTALL CLUTCH RELEASE CYLINDER WITH BEARING ASSEMBLY TO BLEEDER TUBE (for Manual Transaxle)

Click here 2019 - 2022 MY Corolla Corolla Hatchback [06/2018 - 09/2022]; CLUTCH: CLUTCH UNIT (for EG60): INSTALLATION+

13. INSTALL CLUTCH RELEASE CYLINDER WITH BEARING ASSEMBLY (for Manual Transaxle)

Click here 2019 - 2022 MY Corolla Corolla Hatchback [06/2018 - 09/2022]; CLUTCH: CLUTCH UNIT (for EG60): INSTALLATION+

14. INSTALL CLUTCH RELEASE BLEEDER SUB-ASSEMBLY (for Manual Transaxle)

Click here 2019 - 2022 MY Corolla Corolla Hatchback [06/2018 - 09/2022]; CLUTCH: CLUTCH UNIT (for EG60): INSTALLATION+

15. INSTALL BLEEDER TO FLEXIBLE HOSE TUBE (for Manual Transaxle)

Click here 2019 - 2022 MY Corolla Corolla Hatchback [06/2018 - 09/2022]; CLUTCH: CLUTCH UNIT (for EG60): INSTALLATION+

16. INSTALL ENGINE ASSEMBLY (for CVT)

(a) Confirm that the 2 knock pins are installed to the engine assembly and are not damaged.

*a

Knock Pin

(b) Install the engine assembly to the continuously variable transaxle assembly with the 8 bolts.

Torque:

Bolt (A) :

64 N·m {653 kgf·cm, 47 ft·lbf}

Bolt (B) :

25 N·m {255 kgf·cm, 18 ft·lbf}

Bolt (C) :

46 N·m {469 kgf·cm, 34 ft·lbf}

Bolt Length:

Bolt

Length

(A)

50 mm (1.97 in.)

(B)

35 mm (1.38 in.)

(C)

45 mm (1.77 in.)

NOTICE:

  • Make sure that the wire harness or similar items are not pinched between the contact surfaces.
  • Do not use excess force when installing the continuously variable transaxle assembly.
  • When mounting the continuously variable transaxle assembly to the engine assembly, make sure to securely fit the knock pins into the knock holes.
  • Check that the torque converter assembly rotates.
  • When tightening the bolts, be sure that the mating surfaces of the engine assembly and the continuously variable transaxle assembly are in close contact with one another.

HINT:

  • Bolt (A), (B): Install from continuously variable transaxle assembly side.
  • Bolt (C): Install from engine assembly side.

17. INSTALL ENGINE ASSEMBLY (for Manual Transaxle)

(a) Check that the 2 knock pins are installed on the engine assembly before installing the manual transaxle assembly.

*1

Knock Pin

(b) Align the input shaft with the clutch disc and install the engine assembly to the manual transaxle assembly.

(c) Temporarily install the bolt (A).

HINT:

Bolt (A): Install from the manual transaxle assembly side.

(d) Install the bolt (B).

Torque:

64 N·m {653 kgf·cm, 47 ft·lbf}

HINT:

Bolt (B): Install from the manual transaxle assembly side.

(e) Install the bolt (C), then fully tighten the bolt (A).

Torque:

Bolt (C) :

64 N·m {653 kgf·cm, 47 ft·lbf}

Bolt (A) :

46 N·m {469 kgf·cm, 34 ft·lbf}

HINT:

Bolt (C): Install from the manual transaxle assembly side.

(f) Install the bolt (D).

Torque:

25 N·m {255 kgf·cm, 18 ft·lbf}

HINT:

Bolt (D): Install from the manual transaxle assembly side.

(g) Install the 4 bolts (E).

Torque:

46 N·m {469 kgf·cm, 34 ft·lbf}

NOTICE:

  • Make sure that the wire harness or similar items are not pinched between the contact surfaces.
  • Do not forcibly pry on the manual transaxle assembly when installing it to the engine assembly.
  • Do not apply excessive force to the manual transaxle assembly as this will break the input shaft.
  • Make sure that the knock pins fit securely into the holes when installing the manual transaxle assembly to the engine assembly.
  • Make sure that the contact surfaces of the engine assembly and manual transaxle assembly are flat against each other before tightening the bolts.

HINT:

Bolt (E): Install from the engine assembly side.

18. CONNECT WATER BY-PASS HOSE ASSEMBLY (for CVT)

(a) Connect the water by-pass hose assembly to the No. 3 water by-pass pipe sub-assembly and slide the hose clip to secure it.

19. CONNECT WATER INLET HOSE (for CVT)

(a) Connect the water inlet hose to the No. 1 water by-pass hose assembly and slide the hose clip to secure it.

20. INSTALL DRIVE PLATE AND TORQUE CONVERTER ASSEMBLY SETTING BOLT (for CVT)

Click here 2020 MY Corolla Corolla Hatchback [03/2019 - 09/2019]; K120 / K121 (CVT): CONTINUOUSLY VARIABLE TRANSAXLE ASSEMBLY: INSTALLATION+

21. INSTALL FLYWHEEL HOUSING UNDER COVER

(a) Engage the 2 claws and guide to install the flywheel housing under cover to the cylinder block sub-assembly.

Install in this Direction

22. INSTALL DRIVE SHAFT HEAT INSULATOR SUB-ASSEMBLY

  • for Manual Transaxle:

    Click here 2020 - 2021 MY Corolla Corolla Hatchback [03/2019 - 06/2021]; EG60 (MANUAL TRANSMISSION / TRANSAXLE): MANUAL TRANSAXLE ASSEMBLY: INSTALLATION+

  • for CVT:

    Click here 2020 MY Corolla Corolla Hatchback [03/2019 - 09/2019]; K120 / K121 (CVT): CONTINUOUSLY VARIABLE TRANSAXLE ASSEMBLY: INSTALLATION+

23. INSTALL MANIFOLD STAY

Click here 2020 - 2022 MY Corolla Corolla Hatchback [03/2019 - 09/2022]; M20A-FKS (INTAKE / EXHAUST): EXHAUST MANIFOLD (for Double Wishbone Type Suspension): INSTALLATION+

24. INSTALL ENGINE WIRE

(a) Connect all the connectors and clamps, and install the engine wire to the engine assembly with transaxle.

25. INSTALL FLYWHEEL HOUSING SIDE COVER

(a) Install the flywheel housing side cover to the cylinder block sub-assembly.

26. INSTALL STARTER ASSEMBLY

Click here 2019 - 2022 MY Corolla Corolla Hatchback [06/2018 - 09/2022]; M20A-FKS (STARTING): STARTER: INSTALLATION+

27. INSTALL ENGINE MOUNTING INSULATOR SUB-ASSEMBLY RH

HINT:

Perform this procedure only when replacement of the engine mounting insulator sub-assembly RH is necessary.

(a) Type A:

(1) Temporarily install the engine mounting insulator sub-assembly RH to the vehicle.

(2) Install the 2 bolts and nut in the order shown in the illustration.

Torque:

72 N·m {734 kgf·cm, 53 ft·lbf}

NOTICE:

Temporarily tighten the bolt (A), and then fully tighten the 2 bolts and nut in the order of (B), (A) and (C).

(3) Connect the air conditioner tube and accessory assembly with the bolt.

Torque:

9.8 N·m {100 kgf·cm, 87 in·lbf}

(4) Install the No. 2 earth wire to the engine mounting insulator sub-assembly RH and vehicle with the 2 bolts.

Torque:

10.5 N·m {107 kgf·cm, 8 ft·lbf}

(b) Type B:

(1) Temporarily install the engine mounting insulator sub-assembly RH to the vehicle.

(2) Install the 2 bolts and nut in the order shown in the illustration.

Torque:

72 N·m {734 kgf·cm, 53 ft·lbf}

NOTICE:

Temporarily tighten the bolt (A), and then fully tighten the 2 bolts and nut in the order of (B), (A) and (C).

(3) Connect the air conditioner tube and accessory assembly with the bolt.

Torque:

9.8 N·m {100 kgf·cm, 87 in·lbf}

(4) Install the No. 2 earth wire to the engine mounting insulator sub-assembly RH and vehicle with the 2 bolts.

Torque:

10.5 N·m {107 kgf·cm, 8 ft·lbf}

28. INSTALL ENGINE MOUNTING INSULATOR LH

HINT:

Perform this procedure only when replacement of the engine mounting insulator LH is necessary.

(a) Temporarily install the engine mounting insulator LH to the vehicle.

*A

for CVT

*B

for Manual Transaxle

(b) Install the 4 bolts and nut in the order shown in the illustration.

Torque:

42 N·m {428 kgf·cm, 31 ft·lbf}

NOTICE:

Temporarily tighten the bolt (A), and then fully tighten the 4 bolts and nut in the order of (B), (C), (D), (A) and (E).

29. REMOVE ENGINE HANGER

Click here 2020 MY Corolla Corolla Hatchback [03/2019 - 09/2019]; M20A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+

30. INSTALL FUEL DELIVERY GUARD

(a) Install the fuel delivery guard to the engine mounting bracket RH with the bolt.

Torque:

40 N·m {408 kgf·cm, 30 ft·lbf}

31. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE

(a) Using height adjustment attachments and plate lift attachments to keep the engine assembly with transaxle and front suspension crossmember sub-assembly level, set an engine lifter underneath the engine assembly with transaxle and front suspension crossmember sub-assembly.

NOTICE:

  • Using height adjustment attachments and plate lift attachments, keep the engine assembly with transaxle horizontal.
  • Do not perform any procedures while the engine assembly is suspended because doing so may cause the engine assembly to drop, resulting in injury. However, the engine assembly needs to be suspended when it is installed to or removed from an engine stand.
  • To prevent the oil pan sub-assembly from deforming, do not place any attachments under the oil pan sub-assembly of the engine assembly with transaxle.

(b) Operate the engine lifter and install the engine assembly with transaxle to the vehicle.

CAUTION:

Do not raise the engine assembly with transaxle more than necessary. If the engine is raised excessively, the vehicle may also be lifted up.

NOTICE:

  • Make sure that the engine assembly with transaxle is clear of all wiring and hoses.
  • While raising the engine assembly with transaxle into the vehicle, do not allow it to contact the vehicle.

(c) Connect the front suspension crossmember sub-assembly to the vehicle with the 4 bolts.

Torque:

141 N·m {1438 kgf·cm, 104 ft·lbf}

(d) for CVT:

(1) Install the engine mounting insulator LH to the engine mounting bracket LH with the 3 bolts, through bolt and nut in the order shown in the illustration.

Torque:

44 N·m {449 kgf·cm, 32 ft·lbf}

NOTICE:

  • While holding the nut in place, tighten the through bolt.
  • Temporarily tighten the bolt (A), and then fully tighten the 4 bolts and nut in the order of (B), (C), (D) and (A).

(e) for Manual Transaxle:

(1) Install the engine mounting insulator LH to the engine mounting bracket LH with the 4 bolts, through bolt and nut in the order shown in the illustration.

Torque:

44 N·m {449 kgf·cm, 32 ft·lbf}

NOTICE:

  • While holding the nut in place, tighten the through bolt.
  • Temporarily tighten the bolt (A), and then fully tighten the 4 bolts and nut in the order of (B), (C), (D), (E) and (A).

(f) Install the engine mounting insulator sub-assembly RH to the engine mounting bracket RH with the 2 bolts and nut.

Torque:

Bolt :

72 N·m {734 kgf·cm, 53 ft·lbf}

Nut :

41 N·m {418 kgf·cm, 30 ft·lbf}

32. INSTALL REAR SIDE RAIL REINFORCEMENT SUB-ASSEMBLY LH

Click here 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022]; FRONT SUSPENSION: FRONT SUSPENSION MEMBER: INSTALLATION+

33. INSTALL REAR SIDE RAIL REINFORCEMENT SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

34. CONNECT NO. 1 CLUTCH HOSE (for Manual Transaxle)

(a) Connect the No. 1 clutch hose to the clutch flexible hose bracket with a new clip.

(b) Using a 10 mm union nut wrench, connect the bleeder to flexible hose tube to the No. 1 clutch hose.

Torque:

Specified tightening torque :

15.2 N·m {155 kgf·cm, 11 ft·lbf}

HINT:

  • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

    Click here 2019 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 -        ]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION

  • When using a 10 mm union nut wrench (fulcrum length of 22 mm (0.866 in.)) + torque wrench (fulcrum length of 162 mm (6.38 in.)): 13.4 N*m (137 kgf*cm, 10 ft.*lbf)

*a

10 mm Union Nut Wrench

*b

Torque Wrench Fulcrum Length

35. INSTALL DRIVE SHAFT ASSEMBLY

Click here 2020 - 2022 MY Corolla Corolla Hatchback [01/2019 - 09/2022]; DRIVE SHAFT / PROPELLER SHAFT: FRONT DRIVE SHAFT ASSEMBLY (for M20A-FKS): INSTALLATION

36. INSTALL FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst)

Click here 2020 - 2022 MY Corolla Corolla Hatchback [03/2019 - 09/2022]; M20A-FKS (INTAKE / EXHAUST): EXHAUST MANIFOLD (for Double Wishbone Type Suspension): INSTALLATION+

37. INSTALL FRONT FLOOR CENTER BRACE

Click here 2020 - 2022 MY Corolla Corolla Hatchback [03/2019 - 09/2022]; M20A-FKS (INTAKE / EXHAUST): EXHAUST MANIFOLD (for Double Wishbone Type Suspension): INSTALLATION+

38. INSTALL FRONT FLOOR COVER LH

Click here 2020 - 2022 MY Corolla Corolla Hatchback [03/2019 - 09/2022]; M20A-FKS (INTAKE / EXHAUST): EXHAUST MANIFOLD (for Double Wishbone Type Suspension): INSTALLATION+

39. INSTALL FRONT FLOOR COVER RH

Click here 2020 - 2022 MY Corolla Corolla Hatchback [03/2019 - 09/2022]; M20A-FKS (INTAKE / EXHAUST): EXHAUST MANIFOLD (for Double Wishbone Type Suspension): INSTALLATION+

40. CONNECT NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY

Click here 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022]; STEERING GEAR / LINKAGE: STEERING GEAR: INSTALLATION+

41. CONNECT NO. 2 STEERING INTERMEDIATE SHAFT ASSEMBLY

Click here 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2019]; STEERING COLUMN: STEERING COLUMN ASSEMBLY: INSTALLATION+

42. INSTALL COLUMN HOLE COVER SILENCER SHEET

Click here 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2019]; STEERING COLUMN: STEERING COLUMN ASSEMBLY: INSTALLATION+

43. CONNECT SUCTION HOSE SUB-ASSEMBLY

Click here 2019 - 2025 MY Corolla Corolla Hatchback [06/2018 -        ]; HEATING / AIR CONDITIONING: COMPRESSOR (for M20A-FKS): INSTALLATION+

44. CONNECT DISCHARGE HOSE SUB-ASSEMBLY

Click here 2019 - 2025 MY Corolla Corolla Hatchback [06/2018 -        ]; HEATING / AIR CONDITIONING: COMPRESSOR (for M20A-FKS): INSTALLATION+

45. CONNECT NO. 2 WATER BY-PASS HOSE

(a) Connect the No. 2 water by-pass hose to the No. 2 water by-pass pipe assembly and slide the hose clip to secure it.

46. CONNECT FUEL TUBE SUB-ASSEMBLY

(a) Connect the fuel tube sub-assembly to the fuel pump assembly.

Click here 2020 - 2021 MY Corolla Corolla Hatchback [03/2019 - 06/2021]; M20A-FKS (FUEL): FUEL SYSTEM: PRECAUTION

(b) Engage the clamp to connect the fuel tube sub-assembly.

47. CONNECT OUTLET HEATER WATER HOSE

(a) Align the protrusion of the No. 2 water by-pass pipe sub-assembly with the cutout in the outlet heater water hose connector and push them together until the outlet heater water hose makes a "click" sound.

*a

Protrusion

*b

Cutout

(b) Push in the retainer.

*a

Retainer

Push

Push in

(c) Check that the No. 2 water by-pass pipe sub-assembly and outlet heater water hose connector are securely connected by pulling on them.

48. CONNECT INLET HEATER WATER HOSE

(a) Align the protrusions of the inlet heater water hose connector with the cutouts in the flow shutting valve (water valve) and push them together until the inlet heater water hose connector makes a "click" sound.

*a

Protrusion

*b

Cutout

(b) Push in the retainer.

*a

Retainer

Push

Push in

(c) Check that the flow shutting valve (water valve) and inlet heater water hose connector are securely connected by pulling on them.

49. CONNECT NO. 1 FUEL VAPOR FEED HOSE

(a) Connect the No. 1 fuel vapor feed hose to the vacuum surge tank and slide the hose clip to secure it.

(b) Engage the clamp to connect the No. 1 fuel vapor feed hose.

50. CONNECT NO. 1 VACUUM HOSE CONNECTOR

Click here 2019 - 2025 MY Corolla Corolla Hatchback [06/2018 -        ]; BRAKE SYSTEM (OTHER): VACUUM PUMP (for M20A-FKS): INSTALLATION+

51. CONNECT NO. 2 RADIATOR HOSE

(a) Connect the No. 2 radiator hose to the radiator assembly and slide the clip to secure it.

(b) Engage the clamp to connect the No. 2 radiator hose.

52. CONNECT NO. 1 RADIATOR HOSE

(a) Connect the No. 1 radiator hose to the water outlet and slide the clip to secure it.

53. CONNECT FLOOR SHIFT TRANSMISSION CONTROL SELECT CABLE (for CVT)

NOTICE:

Before connecting the floor shift transmission control select cable, check that the shift lever is in N.

(a) Turn the transmission control shaft lever clockwise until it stops, then turn it counterclockwise 2 notches.

*a

N

NOTICE:

If the transmission control shaft lever is turned counterclockwise more than necessary, manual valve link lever sub-assembly may separate from the manual valve.

*1

Transmission Control Shaft Lever

*a

Manual Valve Link Lever Sub-assembly

*b

Manual Valve

(b) Connect the floor shift transmission control select cable to the No. 1 transmission control cable bracket with a new clip.

(c) Connect the floor shift transmission control select cable to the transmission control shaft lever as shown in the illustration.

*a

Correct

*b

Incorrect

54. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY (for Manual Transaxle)

(a) Install the transmission control cable assembly to the control cable bracket assembly with 2 new clips (B).

NOTICE:

Make sure that the paint marks on the transmission control cable assembly are aligned with the slits in the control cable bracket assembly before installing the clips.

*a

Paint Mark

(b) Connect the transmission control cable assembly to the manual transaxle assembly with the 2 clips (A).

55. INSTALL BATTERY CLAMP SUB-ASSEMBLY

(a) Install the battery clamp sub-assembly to the vehicle with the 3 bolts.

Torque:

15.4 N·m {157 kgf·cm, 11 ft·lbf}

(b) Engage the clamp to connect the engine wire to the battery clamp sub-assembly.

56. CONNECT ENGINE WIRE

(a) Engage the 3 clamps to connect the engine wire to the vehicle.

(b) Connect the engine wire to the positive (+) battery terminal with the 3 nuts.

Torque:

7.6 N·m {77 kgf·cm, 67 in·lbf}

(c) Connect the engine wire to the vehicle with the 2 bolts.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

57. INSTALL ECM

Click here 2020 - 2022 MY Corolla Corolla Hatchback [01/2019 - 09/2022]; M20A-FKS (ENGINE CONTROL): ECM: INSTALLATION

58. INSTALL BATTERY

Click here 2019 - 2022 MY Corolla Corolla Hatchback [06/2018 - 09/2022]; MAINTENANCE: M20A-FKS BATTERY: INSTALLATION

59. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Click here 2019 - 2022 MY Corolla Corolla Hatchback [06/2018 - 09/2022]; MAINTENANCE: M20A-FKS BATTERY: INSTALLATION+

60. BLEED CLUTCH LINE (for Manual Transaxle)

Click here 2019 - 2023 MY Corolla Corolla Hatchback [06/2018 - 11/2022]; CLUTCH: CLUTCH SYSTEM (for EG60): BLEEDING+

61. ADD ENGINE OIL

Click here 2020 - 2021 MY Corolla Corolla Hatchback [03/2019 - 06/2021]; MAINTENANCE: M20A-FKS OIL AND OIL FILTER: REPLACEMENT+

62. ADD ENGINE COOLANT

Click here 2019 - 2020 MY Corolla Corolla Hatchback [06/2018 - 09/2019]; MAINTENANCE: M20A-FKS COOLANT: REPLACEMENT+

63. ADD MANUAL TRANSAXLE OIL (for Manual Transaxle)

Click here 2019 - 2023 MY Corolla Corolla Hatchback [06/2018 - 11/2022]; MAINTENANCE: EG60 MANUAL TRANSAXLE OIL: REPLACEMENT+

64. ADD CONTINUOUSLY VARIABLE TRANSAXLE FLUID (for CVT)

Click here 2019 - 2023 MY Corolla Corolla Hatchback [06/2018 - 03/2023]; K120 / K121 (CVT): CONTINUOUSLY VARIABLE TRANSAXLE FLUID: ADJUSTMENT

65. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT

Click here 2020 - 2021 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 06/2020]; HEATING / AIR CONDITIONING: REFRIGERANT (for HFO-1234yf(R1234yf)): REPLACEMENT+

66. WARM UP ENGINE

Click here 2020 - 2021 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 06/2020]; HEATING / AIR CONDITIONING: REFRIGERANT (for HFO-1234yf(R1234yf)): REPLACEMENT+

67. INSPECT TRANSAXLE OIL (for Manual Transaxle)

Click here 2019 - 2023 MY Corolla Corolla Hatchback [06/2018 - 11/2022]; EG60 (MANUAL TRANSMISSION / TRANSAXLE): MANUAL TRANSAXLE OIL: ON-VEHICLE INSPECTION+

68. ADJUST TRANSMISSION CONTROL CABLE ASSEMBLY (for Manual Transaxle)

  • for TMC Made:

    Click here 2020 - 2022 MY Corolla Corolla Hatchback [03/2019 - 09/2022]; EG60 (MANUAL TRANSMISSION / TRANSAXLE): TRANSMISSION CONTROL CABLE (for TMC Made): ADJUSTMENT

  • except TMC Made:

    Click here 2020 - 2022 MY Corolla Corolla Hatchback [03/2019 - 09/2022]; EG60 (MANUAL TRANSMISSION / TRANSAXLE): TRANSMISSION CONTROL CABLE (except TMC Made): ADJUSTMENT

69. INSPECT SHIFT LEVER POSITION (for CVT)

Click here 2020 - 2023 MY Corolla Corolla Hatchback [01/2019 - 03/2023]; K120 / K121 (CVT): SHIFT LEVER: ON-VEHICLE INSPECTION+

70. ADJUST SHIFT LEVER POSITION (for CVT)

for TMC Made: Click here 2019 - 2023 MY Corolla Corolla Hatchback [06/2018 - 03/2023]; K120 / K121 (CVT): TRANSMISSION CONTROL CABLE (for TMC Made): ADJUSTMENT

for TMMMS Made: Click here 2020 - 2023 MY Corolla Corolla Hatchback [03/2019 - 03/2023]; K120 / K121 (CVT): TRANSMISSION CONTROL CABLE (for TMMMS Made): ADJUSTMENT

71. INSPECT FOR ENGINE OIL LEAK

Click here 2020 - 2021 MY Corolla Corolla Hatchback [03/2019 - 06/2021]; MAINTENANCE: M20A-FKS OIL AND OIL FILTER: REPLACEMENT+

72. INSPECT FOR COOLANT LEAK

Click here 2019 - 2020 MY Corolla Corolla Hatchback [06/2018 - 09/2019]; M20A-FKS (COOLING): COOLING SYSTEM: ON-VEHICLE INSPECTION+

73. INSPECT FOR CONTINUOUSLY VARIABLE TRANSAXLE FLUID LEAK (for CVT)

74. INSPECT FOR MANUAL TRANSAXLE OIL LEAK (for Manual Transaxle)

75. INSPECT FOR REFRIGERANT LEAK

Click here 2020 - 2021 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 06/2020]; HEATING / AIR CONDITIONING: REFRIGERANT (for HFO-1234yf(R1234yf)): REPLACEMENT+

76. INSPECT FOR FUEL LEAK

Click here 2019 - 2022 MY Corolla Corolla Hatchback [06/2018 - 09/2022]; M20A-FKS (FUEL): FUEL SYSTEM: ON-VEHICLE INSPECTION+

77. INSPECT FOR EXHAUST GAS LEAK

Click here 2019 - 2025 MY Corolla Corolla Hatchback [06/2018 -        ]; M20A-FKS (INTAKE / EXHAUST): EXHAUST PIPE (for Double Wishbone Type Suspension): INSTALLATION+

78. CHECK ENGINE OIL LEVEL

Click here 2019 - 2023 MY Corolla Corolla Hatchback [06/2018 - 08/2023]; M20A-FKS (LUBRICATION): LUBRICATION SYSTEM: ON-VEHICLE INSPECTION+

79. INSPECT RADIATOR RESERVE TANK ENGINE COOLANT LEVEL

Click here 2019 - 2020 MY Corolla Corolla Hatchback [06/2018 - 09/2019]; M20A-FKS (COOLING): COOLING SYSTEM: ON-VEHICLE INSPECTION+

80. INSTALL REAR ENGINE UNDER COVER LH

(a) Type A:

(1) Install the rear engine under cover LH to the vehicle with the 4 clips.

(2) Install the screw.

(b) Type B:

(1) Install the rear engine under cover LH to the vehicle with the 5 clips.

(2) Install the screw.

81. INSTALL REAR ENGINE UNDER COVER RH

(a) Type A:

(1) Install the rear engine under cover RH to the vehicle with the 4 clips.

(2) Install the screw.

(b) Type B:

(1) Install the rear engine under cover RH to the vehicle with the 5 clips.

(2) Install the screw.

82. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

(a) Install the No. 1 engine under cover assembly to the vehicle with the 4 bolts and 10 clips.

Torque:

7.5 N·m {76 kgf·cm, 66 in·lbf}

83. INSTALL FRONT WHEELS

Click here 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 09/2022]; MAINTENANCE: TIRE AND WHEEL: INSTALLATION

84. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

Click here 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 09/2019]; ALIGNMENT / HANDLING DIAGNOSIS: FRONT WHEEL ALIGNMENT: ADJUSTMENT

85. PERFORM INITIALIZATION

Click here 2019 - 2020 MY Corolla Corolla Hatchback [06/2018 - 09/2019]; M20A-FKS (ENGINE CONTROL): THROTTLE BODY: INSTALLATION+

86. INSPECT IGNITION TIMING

Click here 2020 - 2022 MY Corolla Corolla Hatchback [01/2019 - 09/2022]; M20A-FKS (ENGINE MECHANICAL): ENGINE: ON-VEHICLE INSPECTION+

87. INSPECT ENGINE IDLE SPEED

Click here 2020 - 2022 MY Corolla Corolla Hatchback [01/2019 - 09/2022]; M20A-FKS (ENGINE MECHANICAL): ENGINE: ON-VEHICLE INSPECTION+

88. INSPECT CO/HC

Click here 2020 - 2022 MY Corolla Corolla Hatchback [01/2019 - 09/2022]; M20A-FKS (ENGINE MECHANICAL): ENGINE: ON-VEHICLE INSPECTION+

89. CHECK SPEED SENSOR SIGNAL

Click here 2019 - 2022 MY Corolla Corolla Hatchback GR Corolla [06/2018 - 09/2022]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model with Electric Parking Brake System): UTILITY