Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001HGK2 |
Model Year Start: 2020 |
Model: GR Corolla |
Prod Date Range: [01/2019 - 09/2022] |
Title: THEFT DETERRENT / KEYLESS ENTRY: THEFT DETERRENT SYSTEM (for Gasoline Model): HOW TO PROCEED WITH TROUBLESHOOTING; 2020 - 2022 MY Corolla Corolla Hatchback GR Corolla [01/2019 - 09/2022] |
HOW TO PROCEED WITH TROUBLESHOOTING
|
CAUTION / NOTICE / HINT
HINT:
-
Use this procedure to troubleshoot the theft deterrent system.
-
*: Use the Techstream.
PROCEDURE
1.
|
VEHICLE BROUGHT TO WORKSHOP
|
NEXT
|
|
|
2.
|
CUSTOMER PROBLEM ANALYSIS CHECK
|
HINT:
-
In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
-
Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.
-
The following 5 items are important points for problem analysis:
What
|
Vehicle model, system name
|
When
|
Date, time, occurrence frequency, whether the problem occurred recently or has been occurring for a long time
|
Where
|
Whether the problem occurs at a specific location
|
Under what conditions?
|
Whether the doors were locked or unlocked, whether the ignition switch was ON, whether the engine has started.
|
How did it happen?
|
Problem symptoms
|
NEXT
|
|
|
3.
|
READ AND SAVE OPERATION HISTORY
|
NOTICE:
-
If the vehicle or vehicle controls are operated (for example, during initial inspection when the vehicle is brought in for repair) before operation history has been read and saved, the operation history information could be lost.
-
The operation history function uses the current system time of the Techstream and the time counter inside the controlling ECU to calculate the times shown in the operation history. For this reason, before reading the operation history, first make sure that the Techstream system clock is accurately set to the current time.
(a) Read and save operation history using the Techstream.
Click here
Body Electrical > Main Body > Utility
Tester Display
|
Operation History
|
NEXT
|
|
|
(a) Measure the battery voltage.
Standard Voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
(b) Check the fuses and relays.
(c) Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.
NEXT
|
|
|
NEXT
|
|
|
6.
|
INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
|
(a) Using the Techstream, check for CAN communication system DTCs.
Click here
Result
|
Proceed to
|
CAN DTCs are not output
|
A
|
CAN DTCs are output
|
B
|
A
|
|
|
7.
|
CHECK POWER DOOR LOCK CONTROL SYSTEM
|
(a) Check the power door lock control system.
for Sedan: Click here
for Hatchback: Click here
OK:
Power door lock control system is normal
NG |
|
GO TO POWER DOOR LOCK CONTROL SYSTEM
for Sedan: Click here
for Hatchback: Click here
|
OK
|
|
|
8.
|
CHECK WIRELESS DOOR LOCK CONTROL SYSTEM
|
(a) Check the wireless door lock control system.
w/ Smart Key System: Click here
w/o Smart Key System: Click here
OK:
Wireless door lock control system is normal
NG |
|
GO TO WIRELESS DOOR LOCK CONTROL SYSTEM
w/ Smart Key System: Click here
w/o Smart Key System: Click here
|
OK
|
|
|
9.
|
CHECK SMART KEY SYSTEM (for Entry Function)
|
(a) Check the smart key system (for Entry Function).
Click here
OK:
Smart key system (for Entry Function) is normal
OK
|
|
|
10.
|
CHECK SMART KEY SYSTEM (for Start Function)
|
(a) Check the smart key system (for Start Function).
Click here
OK:
Smart key system (for Start Function) is normal
OK
|
|
|
11.
|
CHECK LIGHTING SYSTEM (EXT)
|
(a) Check the lighting system (EXT).
w/ AFS: Click here
w/o AFS: Click here
OK:
Lighting system (EXT) is normal
NG |
|
GO TO LIGHTING SYSTEM (EXT)
w/ AFS: Click here
w/o AFS: Click here
|
OK
|
|
|
12.
|
CHECK LIGHTING SYSTEM (INT)
|
(a) Check the lighting system (INT).
Click here
OK:
Lighting system (INT) is normal
OK
|
|
|
(a) Check the horn system.
OK:
Horn system is normal
OK
|
|
|
14.
|
PROBLEM SYMPTOMS TABLE
|
(a) Refer to Problem Symptoms Table.
Click here
Result
|
Proceed to
|
Fault is not listed in Problem Symptoms Table (Fault can be simulated)
|
A
|
Fault is not listed in Problem Symptoms Table (Fault cannot be simulated)
|
B
|
Fault is listed in Problem Symptoms Table
|
C
|
A
|
|
|
15.
|
PERFORM OVERALL ANALYSIS AND TROUBLESHOOTING*
|
(a) System Description
Click here
(b) Terminals of ECU
Click here
(c) Data List / Active Test
Click here
(d) Inspection
NEXT
|
|
|
NEXT
|
|
|
NEXT |
|
END
|
|