| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000001HF0K |
| Model Year Start: 2020 | Model: GR Corolla | Prod Date Range: [01/2019 - ] |
| Title: LIGHTING (EXT): STOP LIGHT SWITCH: INSTALLATION; 2020 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL STOP LIGHT SWITCH ASSEMBLY
(a) Insert the stop light switch assembly until the threaded sleeve hits the pedal as shown in the illustration.
|
*1 |
Stop Light Switch Mounting Adjuster |
|
Insert in this Direction |
NOTICE:
When inserting the stop light switch assembly, support the pedal from behind so that the pedal is not pushed in.
(b) Turn the stop light switch assembly 1/4 turn clockwise as shown in the illustration to install it.
|
*a |
Protrusion of the Plunger |
|
|
Turn in this Direction |
Torque:
1.5 N·m {15 kgf·cm, 13 in·lbf}
or less
(c) Connect the connector.
(d) Check the protrusion of the plunger.
Protrusion of the Plunger
|
Area |
Measurement |
|---|---|
|
a |
0.5 to 2.6 mm (0.0197 to 0.102 in.) |
(e) If the protrusion is not as specified, recheck the stop light switch assembly installation and perform brake pedal adjustment if necessary.
for Gasoline Model:
Click here
![2019 - 2022 MY Corolla Corolla Hatchback GR Corolla [06/2018 - 09/2022]; BRAKE SYSTEM (OTHER): BRAKE PEDAL (for Gasoline Model): ADJUSTMENT](/t3Portal/stylegraphics/info.gif)
for HV Model:
Click here
NOTICE:
Do not depress or support the brake pedal.
2. INSTALL NO. 1 AIR DUCT
Click here
3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here
|
|