| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM100000001HCAA |
| Model Year Start: 2020 | Model: GR Corolla | Prod Date Range: [01/2019 - 09/2019] |
| Title: CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): REMOVAL; 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2019] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during DCM (telematics transceiver) removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function When Necessary Procedures are not Performed |
Link |
|---|---|---|---|
|
DCM (telematics transceiver) |
DCM activation |
Safety Connect System |
|
Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function When Necessary Procedures are not Performed |
Link |
|---|---|---|---|
| *: for Toyota Entune Remote Connect Compatible Type with Smart Key System | |||
|
DCM (telematics transceiver) |
DCM activation |
Safety Connect System |
|
|
DCM (telematics transceiver)* |
Code registration (Smart key System (for Start Function)) |
Smart Key System (for Start Function) |
|
PROCEDURE
1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here
![2020 - 2022 MY Corolla Corolla Hatchback Corolla HV [01/2019 - 09/2022]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX (except G16E-GTS): REMOVAL+](/t3Portal/stylegraphics/info.gif)
2. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL
Click here
3. REMOVE FRONT CONSOLE UPPER PANEL GARNISH
Click here
4. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Click here
5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY
Click here
6. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY
Click here
7. DISCONNECT INSTRUMENT PANEL WIRE
|
(a) Disengage the clamp. |
|
|
(b) Remove the 2 nuts and disconnect the instrument panel wire as shown in the illustration. |
|
8. REMOVE NAVIGATION ECU COVER (w/ Navigation System)
Click here
9. REMOVE NAVIGATION ECU WITH BRACKET (w/ Navigation System)
Click here
10. REMOVE DCM (TELEMATICS TRANSCEIVER)
|
(a) Disconnect the 5 connectors. |
|
(b) Remove the 2 nuts and DCM (telematics transceiver).
|
|