Last Modified: 07-31-2024 6.11:8.1.0 Doc ID: RM100000001HBMP
Model Year Start: 2020 Model: GR Corolla Prod Date Range: [01/2019 - 09/2022]
Title: PRE-COLLISION: PRE-COLLISION SYSTEM (for Gasoline Model): U030057; Internal Control Module Software Incompatibility Invalid / Incompatible Software Component; 2020 - 2022 MY Corolla Corolla Hatchback GR Corolla [01/2019 - 09/2022]

DTC

U030057

Internal Control Module Software Incompatibility Invalid / Incompatible Software Component

DESCRIPTION

The forward recognition camera receives vehicle information from the ECM via CAN communication.

If the vehicle information stored in the forward recognition camera differs from that sent from the ECM, the forward recognition camera stores this DTC.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

U030057

Internal Control Module Software Incompatibility Invalid / Incompatible Software Component

When the ignition switch is ON for 3 seconds or more, the vehicle information sent from the ECM does not match that stored in the forward recognition camera for 1 second or more.

  • SFI system
  • Forward recognition camera
  • ECM

CAUTION / NOTICE / HINT

NOTICE:

  • When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.
  • If the forward recognition camera has been replaced with a new one, forward recognition camera adjustment must be performed.

    HINT:

    Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.

    One Time Recognition: Click here 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022]; CRUISE CONTROL: FRONT CAMERA: ADJUSTMENT (ONE TIME RECOGNITION)

    Sequential Recognition: Click here 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022]; CRUISE CONTROL: FRONT CAMERA: ADJUSTMENT (SEQUENTIAL RECOGNITION)

PROCEDURE

1.

CHECK FOR DTCs

(a) Using the Techstream, check for SFI system DTCs.

(1) for M20A-FKS:

Powertrain > Engine > Trouble Codes

(2) for 2ZR-FAE:

Powertrain > Engine and ECT > Trouble Codes

Result

Proceed to

SFI system DTCs are not output

A

SFI system DTCs are output

B

B

GO TO SFI SYSTEM

for M20A-FKS: Click here 2019 - 2025 MY Corolla Corolla Hatchback [06/2018 -        ]; M20A-FKS (ENGINE CONTROL): SFI SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

for 2ZR-FAE: Click here 2020 - 2023 MY Corolla [01/2019 - 11/2022]; 2ZR-FAE (ENGINE CONTROL): SFI SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

A

2.

CHECK FOR DTCs (HEALTH CHECK)

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: System Select / Health Check.

(e) Check DTCs.

(f) Turn the ignition switch off.

OK:

DTCs indicating a vehicle information mismatch with the ECM are not output by any ECU other than the forward recognition camera.

Result

Proceed to

DTCs are not output

A

DTCs are output

B

B

REPLACE ECM

for M20A-FKS: Click here 2019 - 2022 MY Corolla Corolla Hatchback [06/2018 - 09/2022]; M20A-FKS (ENGINE CONTROL): ECM: COMPONENTS

for 2ZR-FAE: Click here 2020 - 2023 MY Corolla [01/2019 - 11/2022]; 2ZR-FAE (ENGINE CONTROL): ECM: COMPONENTS

A

3.

READ VALUE USING TECHSTREAM

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Pre-Collision System / Data List.

(e) Read the Data List according to the display on the Techstream.

Body Electrical > Pre-Collision System > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Vehicle Information (Conv/HV)

Vehicle information (Conv/HV)

Unknown / Conv / HV

Conv: Conventional

HV: Hybrid vehicle

-

Body Electrical > Pre-Collision System > Data List

Tester Display

Vehicle Information (Conv/HV)

HINT:

  • If the vehicle information stored in the forward recognition camera is different than the actual vehicle specifications, the vehicle information stored in the forward recognition camera may be incorrect. Check for DTCs and replace the forward recognition camera if necessary.
  • If the vehicle information stored in the forward recognition camera matches the actual vehicle specifications, the installed ECM is incompatible. Replace the ECM with a correct one.

Result

Proceed to

Vehicle information stored in forward recognition camera and actual vehicle specifications do not match

A

Vehicle information stored in forward recognition camera and actual vehicle specifications match

B

A

REPLACE FORWARD RECOGNITION CAMERA

B

REPLACE ECM

for M20A-FKS: Click here 2019 - 2022 MY Corolla Corolla Hatchback [06/2018 - 09/2022]; M20A-FKS (ENGINE CONTROL): ECM: COMPONENTS

for 2ZR-FAE: Click here 2020 - 2023 MY Corolla [01/2019 - 11/2022]; 2ZR-FAE (ENGINE CONTROL): ECM: COMPONENTS