Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001HBGY
Model Year Start: 2020 Model: Corolla Prod Date Range: [01/2019 - 04/2020]
Title: 2ZR-FXE (COOLING): COOLING FAN MOTOR: REMOVAL; 2020 MY Corolla Corolla HV [01/2019 - 04/2020]

REMOVAL

PROCEDURE

1. REMOVE INVERTER WATER PUMP WITH MOTOR ASSEMBLY

Click here 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022]; HYBRID / BATTERY CONTROL: WATER PUMP WITH MOTOR: REMOVAL

2. DRAIN ENGINE COOLANT (for Engine)

Click here 2020 MY Corolla Corolla HV [01/2019 - 04/2020]; MAINTENANCE: 2ZR-FXE COOLANT (for Engine Coolant): REPLACEMENT+

3. REMOVE HEADLIGHT ASSEMBLY

Click here 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022]; LIGHTING (EXT): HEADLIGHT ASSEMBLY: REMOVAL

4. REMOVE INLET NO. 2 AIR CLEANER

Click here 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022]; 2ZR-FXE (INTAKE / EXHAUST): INTAKE MANIFOLD: REMOVAL+

5. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

Click here 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022]; 2ZR-FXE (ENGINE CONTROL): THROTTLE BODY: REMOVAL+

6. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

Click here 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022]; 2ZR-FXE (INTAKE / EXHAUST): INTAKE MANIFOLD: REMOVAL+

7. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

Click here 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022]; 2ZR-FXE (INTAKE / EXHAUST): INTAKE MANIFOLD: REMOVAL+

8. REMOVE AIR CLEANER BRACKET

Click here 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022]; 2ZR-FXE (INTAKE / EXHAUST): INTAKE MANIFOLD: REMOVAL+

9. REMOVE INLET NO. 1 AIR CLEANER

Click here 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022]; 2ZR-FXE (INTAKE / EXHAUST): INTAKE MANIFOLD: REMOVAL+

10. REMOVE HOOD LOCK ASSEMBLY

Click here 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022]; DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: REMOVAL+

11. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY

(a) Disengage the clamp to disconnect the hood lock control cable assembly from the upper radiator support sub-assembly.

(b) Disconnect the horn connector. (for Single Type)

(c) Disconnect the 2 horn connectors. (for Dual Type)

(d) Disengage the 3 clamps to disconnect the wire harness from the upper radiator support sub-assembly.

(e) Remove the 5 bolts and upper radiator support sub-assembly.

12. DISCONNECT INVERTER RESERVE TANK ASSEMBLY

(a) Disengage the clamp to disconnect the inlet hybrid water pump hose from the fan shroud.

*1

Inlet Hybrid Water Pump Hose

*2

No. 1 Inlet Inverter Cooling Hose

(b) Disengage the 2 clamps to disconnect the No. 1 inlet inverter cooling hose from the fan shroud and inverter reserve tank assembly.

(c) Disengage the 2 claws to disconnect the inverter reserve tank assembly from the fan shroud.

13. DISCONNECT NO. 2 WATER BY-PASS HOSE

(a) Disengage the 4 clamps to disconnect the No. 2 water by-pass hose from the fan shroud.

(b) Slide the clip and disconnect the No. 2 water by-pass hose from the radiator assembly.

14. DISCONNECT INLET HYBRID RADIATOR HOSE

(a) Disengage the clamp to disconnect the inlet hybrid radiator hose from the fan shroud.

15. DISCONNECT NO. 2 RADIATOR HOSE

(a) Slide the clip and disconnect the No. 2 radiator hose from the radiator assembly.

16. REMOVE NO. 2 RADIATOR AIR GUIDE

(a) Disengage the 5 claws to remove the No. 2 radiator air guide.

17. REMOVE FAN WITH MOTOR ASSEMBLY

(a) Disengage the 3 clamps to disconnect the wire harness from the fan shroud.

(b) Disengage the 3 clamps to disconnect the wire harness from the fan shroud.

(c) Disconnect the cooling fan motor RH connector and cooling fan motor LH connector.

(d) Disengage the 2 claws.

(e) Disengage the 2 guides to remove the fan with motor assembly from the radiator assembly.

NOTICE:

Do not damage the radiator assembly when removing the fan with motor assembly.

18. REMOVE FAN RH

(a) Remove the nut and fan RH.

19. REMOVE FAN LH

(a) Remove the nut and fan LH.

20. REMOVE COOLING FAN MOTOR RH

(a) Remove the 3 screws and cooling fan motor RH.

21. REMOVE COOLING FAN MOTOR LH

(a) Disengage the 3 clamps.

(b) Remove the 3 screws and cooling fan motor LH.