| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM100000001HBGS |
| Model Year Start: 2020 | Model: Corolla | Prod Date Range: [01/2019 - ] |
| Title: 2ZR-FXE (COOLING): THERMOSTAT: INSTALLATION; 2020 - 2025 MY Corolla Corolla HV [01/2019 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL WATER INLET WITH THERMOSTAT SUB-ASSEMBLY
(a) Type A:
(1) Install a new gasket to the water inlet with thermostat sub-assembly.
(2) Install the water inlet with thermostat sub-assembly with the 2 nuts and bolt.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
(b) Type B:
(1) Install a new gasket to the water inlet with thermostat sub-assembly.
(2) Install the water inlet with thermostat sub-assembly with the 3 bolts.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
(c) Connect the No. 2 radiator hose and No. 3 water by-pass hose to the water inlet with thermostat sub-assembly and slide the 2 clips to secure them.
2. INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE
(a) Install a new engine oil level dipstick guide O-ring to the engine oil level dipstick guide.
(b) Apply a light coat of engine oil to the engine oil level dipstick guide O-ring.
(c) Insert the engine oil level dipstick guide end into the oil pan sub-assembly.
(d) Install the engine oil level dipstick guide to the cylinder block sub-assembly with the bolt.
Torque:
21 N·m {214 kgf·cm, 15 ft·lbf}
(e) Engage the clamp to connect the engine wire to the engine oil level dipstick guide.
3. INSTALL ENGINE OIL LEVEL DIPSTICK
(a) Install the engine oil level dipstick to the engine oil level dipstick guide.
4. INSTALL INLET NO. 1 AIR CLEANER
Click here
![2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022]; 2ZR-FXE (INTAKE / EXHAUST): INTAKE MANIFOLD: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
5. INSTALL AIR CLEANER BRACKET
Click here
6. INSTALL AIR CLEANER CASE SUB-ASSEMBLY
Click here
7. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
Click here
8. INSTALL AIR CLEANER CAP SUB-ASSEMBLY
Click here
9. INSTALL INLET NO. 2 AIR CLEANER
Click here
10. INSTALL RADIATOR SUPPORT OPENING COVER
Click here
11. ADD ENGINE COOLANT (for Engine)
Click here
12. INSPECT FOR COOLANT LEAK (for Engine)
Click here
13. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY
Click here
|
|