| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM100000001HAQ5 |
| Model Year Start: 2020 | Model: GR Corolla | Prod Date Range: [01/2019 - ] |
| Title: DOOR / HATCH: FUEL LID OPENER SYSTEM: DATA LIST / ACTIVE TEST; 2020 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - ] | ||
DATA LIST / ACTIVE TEST
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
DATA LIST
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Powertrain / Engine / Data List.
(e) Read the Data List according to the display on the Techstream.
Powertrain > Engine > Data List
|
Tester Display |
Measurement Item |
Range |
Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
Fuel Filler Opener |
Fuel lid lock with motor assembly status |
OFF or ON |
OFF: Fuel lid lock with motor assembly not operating ON: Fuel lid lock with motor assembly operating |
- |
|
Fuel Lid SW |
Fuel lid opener switch status |
Close or Open |
Close: Fuel lid opener switch not pushed Open: Fuel lid opener switch pushed |
- |
|
Fuel Lid Sensor SW |
Fuel lid courtesy switch status |
Close or Open |
Close: Fuel lid closed Open: Fuel lid open |
- |
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
ACTIVE TEST
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Powertrain / Engine / Active Test.
(e) Perform the Active Test according to the display on the Techstream.
Powertrain > Engine > Active Test
|
Tester Display |
Measurement Item |
Control Range |
Diagnostic Note |
|---|---|---|---|
|
Activate the Fuel Filler Opener |
Fuel lid lock with motor assembly |
OFF/ON |
- |
|
|