Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001HA7C
Model Year Start: 2020 Model: GR Corolla Prod Date Range: [01/2019 - 09/2022]
Title: DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM (for Sedan, Gasoline Model): All Doors LOCK/UNLOCK Functions do not Operate Via Master Switch; 2020 - 2022 MY Corolla Corolla Hatchback GR Corolla [01/2019 - 09/2022]

All Doors LOCK/UNLOCK Functions do not Operate Via Master Switch

DESCRIPTION

The main body ECU (multiplex network body ECU) receives switch signals from the multiplex network master switch assembly. The main body ECU (multiplex network body ECU) activates the door lock motor on each door according to this signal.

WIRING DIAGRAM

CAUTION / NOTICE / HINT

NOTICE:

  • The power door lock control system uses the LIN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Troubleshoot the power door lock control system after confirming that the communication systems are functioning properly.

    Click here 2019 - 2022 MY Corolla Corolla Hatchback GR Corolla [06/2018 - 09/2022]; NETWORKING: LIN COMMUNICATION SYSTEM (for Gasoline Model): HOW TO PROCEED WITH TROUBLESHOOTING

  • Before replacing the main body ECU (multiplex network body ECU), refer to Registration.*

    Click here 2020 MY Corolla Corolla Hatchback GR Corolla [01/2019 - 09/2019]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function, Gasoline Model): REGISTRATION 2020 MY Corolla Corolla Hatchback GR Corolla [09/2019 - 04/2020]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function, Gasoline Model): REGISTRATION 2021 - 2022 MY Corolla Corolla Hatchback GR Corolla [04/2020 - 09/2022]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function, Gasoline Model): REGISTRATION

    *: w/ Smart Key System

PROCEDURE

1.

CHECK POWER WINDOW CONTROL SYSTEM

(a) Check the power window operation using the multiplex network master switch assembly.

OK:

Each power window operates normally.

OK

REPLACE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY

NG

2.

READ VALUE USING TECHSTREAM (DOOR LOCK SWITCH STATUS, DOOR UNLOCK SWITCH STATUS)

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Master Switch / Data List.

(e) Read the Data List according to the display on the Techstream.

Body Electrical > Master Switch > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Door Lock Switch Status

Multiplex network master switch assembly lock signal

OFF or ON

OFF: Lock switch of multiplex network master switch assembly not pushed

ON: Lock switch of multiplex network master switch assembly pushed

-

Door Unlock Switch Status

Multiplex network master switch assembly unlock signal

OFF or ON

OFF: Unlock switch of multiplex network master switch assembly not pushed

ON: Unlock switch of multiplex network master switch assembly pushed

-

Body Electrical > Master Switch > Data List

Tester Display

Door Lock Switch Status

Door Unlock Switch Status

OK:

The Techstream display changes correctly in response to the lock/unlock operation.

OK

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 03/2019]; POWER DISTRIBUTION: MAIN BODY ECU: REMOVAL 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 09/2022]; POWER DISTRIBUTION: MAIN BODY ECU: REMOVAL

NG

REPLACE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY