Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001H93V |
Model Year Start: 2020 |
Model: Corolla |
Prod Date Range: [01/2019 - 09/2022] |
Title: PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM (for HV Model (w/o Safe Exit Assist Function)): C1ABB; Blind Spot Monitor Master Module Beam Axis Inspection Incomplete; 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022] |
DTC
|
C1ABB
|
Blind Spot Monitor Master Module Beam Axis Inspection Incomplete
|
DESCRIPTION
This DTC is stored when a beam axis inspection has not been performed for the blind spot monitor sensor LH.
HINT:
This DTC is always stored after replacing a blind spot monitor sensor. The purpose of this DTC is to ensure that a beam axis inspection is performed. Completing the beam axis inspection after replacing a blind spot monitor sensor prevents this DTC from being output.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
C1ABB
|
Blind Spot Monitor Master Module Beam Axis Inspection Incomplete
|
A beam axis inspection has not been performed
|
Blind spot monitor sensor LH
|
PROCEDURE
1.
|
PROCEED TO TEST MODE (BLIND SPOT MONITOR BEAM AXIS INSPECTION)
|
(a) Change the blind spot monitor sensor LH to Test Mode using the Techstream.
HINT:
Refer to Blind Spot Monitor Beam Axis Inspection.
Click here
NEXT |
|
END
|
|