P610 (HYBRID TRANSMISSION / TRANSAXLE): SHIFT LEVER: INSTALLATION; 2020 - 2022 MY Corolla Corolla HV [01/2019

Last Modified: 07-31-2024	6.11:8.1.0	Doc ID: RM100000001H6TL
Model Year Start: 2020	Model: Corolla	Prod Date Range: [01/2019 - 09/2022]
Title: P610 (HYBRID TRANSMISSION / TRANSAXLE): SHIFT LEVER: INSTALLATION; 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022]

INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY

(a) Engage the 2 clamps to connect the wire harness to the transmission floor shift assembly.

(b) Connect the shift lock control ECU connector.

(d) Temporarily install the transmission floor shift assembly to the vehicle body with the 4 bolts.

(e) Fully tighten the 4 bolts in the order shown in the illustration.

Torque:

12 N·m {122 kgf·cm, 9 ft·lbf}

2. CONNECT FLOOR SHIFT TRANSMISSION CONTROL SELECT CABLE

NOTICE:

Before connecting the transmission control cable assembly, check that the shift lever is in N.

(a) Slide the adjuster case cover in the direction shown by the arrow.

*a	Slide
*b	Adjuster Case Cover

(b) Using a precision screwdriver, pull out the lock piece of the adjuster case.

*a	Pull Out
*b	Lock Piece
*c	Adjuster Case

(c) Turn the lock nut of the floor shift transmission control select cable counterclockwise. While holding the lock nut, push in the stopper.

*a	Lock Nut
*b	Push in
*c	Stopper

(d) Connect the floor shift transmission control select cable to the transmission floor shift assembly.

NOTICE:

After installation, check that the outer part of the stopper is as shown in the illustration.
Do not forcibly pull the floor shift transmission control select cable into the cabin.

Stopper

(e) Connect the floor shift transmission control select cable to the transmission floor shift assembly.

NOTICE:

Before connecting the floor shift transmission control select cable, check that the shift lever is in N.

(f) Push in the lock piece of the adjuster case to lock it.

*a	Adjuster Case
*b	Lock Piece

NOTICE:

When pushing in the lock piece of the adjuster case to lock it, remove your hand from the lever shaft.

*1	Floor Shift Transmission Control Select Cable
*a	Lever Shaft

When pushing in the lock piece of the adjuster case to lock it, do not move the lever shaft or floor shift transmission control select cable forward or backward.

(g) Move the adjuster case cover in the direction shown by the arrow.

NOTICE:

If the adjuster case cover is not moved far enough so that the adjuster case cover engages the lock piece, the cable will not be able to lock, and reliable shift operation will not be possible.

*a	Adjuster Case
*b	Adjuster Case Cover

3. INSTALL CONSOLE BOX ASSEMBLY

Click here

4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

Click here

5. INSTALL SHIFT LOCK RELEASE BUTTON COVER

(a) Engage the 2 claws to install the shift lock release button cover to the position indicator housing assembly.

6. INSPECT SHIFT LEVER POSITION

Click here

7. ADJUST SHIFT LEVER POSITION

Click here