| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000001H6T6 |
| Model Year Start: 2020 | Model: Corolla | Prod Date Range: [01/2019 - 09/2022] |
| Title: P610 (HYBRID TRANSMISSION / TRANSAXLE): TRANSMISSION CONTROL CABLE: ADJUSTMENT; 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022] | ||
ADJUSTMENT
PROCEDURE
1. SECURE VEHICLE
(a) Fully apply the parking brake and chock a wheel.
CAUTION:
- Make sure to apply the parking brake and chock a wheel before performing this procedure.
- If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.
2. REMOVE CONSOLE BOX ASSEMBLY
Click here
![2020 - 2022 MY Corolla Corolla Hatchback Corolla HV [01/2019 - 09/2022]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX (except G16E-GTS): REMOVAL](/t3Portal/stylegraphics/info.gif)
3. ADJUST SHIFT LEVER POSITION
NOTICE:
Before adjusting the floor shift transmission control select cable, check that the shift lever position sensor and shift lever are in N.
|
(a) Slide the adjuster case cover in the direction shown by the arrow. |
|
|
(b) Using a precision screwdriver, pull out the lock piece of the adjuster case. |
|
(c) Push in the lock piece of the adjuster case to lock it.
|
*a |
Adjuster Case |
|
*b |
Lock Piece |
NOTICE:
-
When pushing in the lock piece of the adjuster case to lock it, remove your hand from the lever shaft.
*1
Floor Shift Transmission Control Select Cable
*a
Lever Shaft
- When pushing in the lock piece of the adjuster case to lock it, do not move the lever shaft or floor shift transmission control select cable forward or backward.
|
(d) Move the adjuster case cover in the direction shown by the arrow. NOTICE: If the adjuster case cover is not moved far enough so that the adjuster case cover engages the lock piece, the cable will not be able to lock, and reliable shift operation will not be possible. |
|
4. INSTALL CONSOLE BOX ASSEMBLY
Click here
|
|