Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001H5VX |
Model Year Start: 2020 |
Model: Corolla |
Prod Date Range: [01/2019 - 09/2022] |
Title: LIGHTING (EXT): LIGHTING SYSTEM (for HV Model): Turn Signal Switch Circuit; 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022] |
Turn Signal Switch Circuit
|
DESCRIPTION
The steering sensor receives the turn signal switch information and controls the turn signal lights.
WIRING DIAGRAM
PROCEDURE
1.
|
READ VALUE USING TECHSTREAM
|
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Chassis / Steering Angle Sensor / Data List.
(e) Read the Data List according to the display on the Techstream.
Chassis > Steering Angle Sensor > Data List
Tester Display
|
Measurement Item
|
Range
|
Normal Condition
|
Diagnostic Note
|
Turn Signal Switch (Right)
|
Turn signal switch (right turn position) signal
|
OFF or ON
|
OFF: Turn signal switch not in right turn position
ON: Turn signal switch in right turn position
|
-
|
Turn Signal Switch (Left)
|
Turn signal switch (left turn position) signal
|
OFF or ON
|
OFF: Turn signal switch not in left turn position
ON: Turn signal switch in left turn position
|
-
|
Cornering Light/Front Side Illuminate Light Switch
|
Turn signal switch (full turn) signal
|
OFF or ON
|
OFF: Turn signal switch not in left or right turn position
ON: Turn signal switch in left or right full turn position
|
-
|
Chassis > Steering Angle Sensor > Data List
Tester Display
|
Turn Signal Switch (Right)
|
Turn Signal Switch (Left)
|
Cornering Light/Front Side Illuminate Light Switch
|
OK:
Normal conditions listed above are displayed.
NG
|
|
|
2.
|
INSPECT TURN SIGNAL SWITCH
|
(a) Remove the turn signal switch.
Click here
(b) Inspect the turn signal switch.
Click here
OK
|
|
|
3.
|
INSPECT STEERING WHEEL SWITCH HOUSING
|
(a) Remove the steering wheel switch housing.
Click here
(b) Inspect the steering wheel switch housing.
Click here
|