Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001H4YD
Model Year Start: 2020 Model: Corolla Prod Date Range: [01/2019 -           ]
Title: 2ZR-FXE (ENGINE CONTROL): KNOCK SENSOR: INSTALLATION; 2020 - 2025 MY Corolla Corolla HV [01/2019 -        ]

INSTALLATION

PROCEDURE

1. INSTALL KNOCK CONTROL SENSOR

HINT:

Perform "Inspection After Repair" after replacing a knock control sensor.

Click here 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022]; 2ZR-FXE (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION 2023 - 2025 MY Corolla Corolla HV [09/2022 -        ]; 2ZR-FXE (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION

(a) Install the knock control sensor to the cylinder block sub-assembly with the bolt as shown in the illustration.

Torque:

21 N·m {214 kgf·cm, 15 ft·lbf}

NOTICE:

Make sure that the knock control sensor is in the correct position.

*a

Top

*b

10°

(b) Connect the knock control sensor connector.

2. INSTALL INTAKE MANIFOLD

Click here 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022]; 2ZR-FXE (INTAKE / EXHAUST): INTAKE MANIFOLD: INSTALLATION 2023 - 2025 MY Corolla Corolla HV [09/2022 -        ]; 2ZR-FXE (INTAKE / EXHAUST): INTAKE MANIFOLD: INSTALLATION

3. PERFORM INITIALIZATION

(a) Perform "Inspection After Repair" after replacing a knock control sensor.

Click here 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022]; 2ZR-FXE (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION 2023 - 2025 MY Corolla Corolla HV [09/2022 -        ]; 2ZR-FXE (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION