(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
1 - 2
|
20°C (68°F)
|
2.32 to 2.59 kΩ
|
80°C (176°F)
|
0.310 to 0.326 kΩ
|
NOTICE:
If checking the No. 2 engine coolant temperature sensor in water, be careful not to allow water to contact the terminals. After checking, wipe the water off the No. 2 engine coolant temperature sensor.
If the result is not as specified, replace the No. 2 engine coolant temperature sensor.
|
|
*a
|
Component without harness connected
(No. 2 Engine Coolant Temperature Sensor)
|
|
|