Last Modified: 07-31-2024 6.11:8.1.0 Doc ID: RM100000001H4Y2
Model Year Start: 2020 Model: Corolla Prod Date Range: [01/2019 -           ]
Title: 2ZR-FXE (ENGINE CONTROL): CRANKSHAFT POSITION SENSOR: INSTALLATION; 2020 - 2025 MY Corolla Corolla HV [01/2019 -        ]

INSTALLATION

PROCEDURE

1. INSTALL CRANKSHAFT POSITION SENSOR

(a) Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.

NOTICE:

If reusing the crankshaft position sensor, check the O-ring.

(b) Install the crankshaft position sensor to the cylinder block sub-assembly with the bolt.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

NOTICE:

  • Make sure that the O-ring is not cracked or moved out of place when installing crankshaft position sensor.
  • If the crankshaft position sensor has been struck or dropped, replace it.

(c) Connect the crankshaft position sensor connector.

2. INSPECT FOR ENGINE OIL LEAK

Click here 2020 - 2021 MY Corolla Corolla HV [01/2019 - 06/2021]; MAINTENANCE: 2ZR-FXE OIL AND OIL FILTER: REPLACEMENT+ 2022 MY Corolla Corolla HV [06/2021 - 09/2022]; MAINTENANCE: 2ZR-FXE OIL AND OIL FILTER: REPLACEMENT+ 2023 - 2025 MY Corolla Corolla HV [09/2022 -        ]; MAINTENANCE: 2ZR-FXE OIL AND OIL FILTER: REPLACEMENT+

3. INSTALL REAR ENGINE UNDER COVER RH

(a) Type A:

(1) Install the rear engine under cover RH to the vehicle with the screw and 7 clips.

(b) Type B:

(1) Install the rear engine under cover RH to the vehicle with the screw and 8 clips.