| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000001H4Y1 |
| Model Year Start: 2020 | Model: Corolla | Prod Date Range: [01/2019 - 09/2022] |
| Title: 2ZR-FXE (ENGINE CONTROL): CRANKSHAFT POSITION SENSOR: REMOVAL; 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022] | ||
REMOVAL
PROCEDURE
1. REMOVE REAR ENGINE UNDER COVER RH
|
(a) Type A: (1) Remove the screw, 7 clips and rear engine under cover RH from the vehicle. |
|
(b) Type B:
(1) Remove the screw, 8 clips and rear engine under cover RH from the vehicle.
2. REMOVE CRANKSHAFT POSITION SENSOR
|
(a) Disconnect the crankshaft position sensor connector. |
|
(b) Remove the bolt and crankshaft position sensor from the cylinder block sub-assembly.
NOTICE:
If the crankshaft position sensor has been struck or dropped, replace it.
|
|