2ZR-FXE (ENGINE CONTROL): CAMSHAFT OIL CONTROL VALVE: INSTALLATION; 2020 - 2025 MY Corolla Corolla HV [01/2019

Last Modified: 07-31-2024	6.11:8.1.0	Doc ID: RM100000001H4XI
Model Year Start: 2020	Model: Corolla	Prod Date Range: [01/2019 - ]
Title: 2ZR-FXE (ENGINE CONTROL): CAMSHAFT OIL CONTROL VALVE: INSTALLATION; 2020 - 2025 MY Corolla Corolla HV [01/2019 - ]

INSTALLATION

1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

(a) Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve assembly.

NOTICE:

Do not damage the O-ring.

(b) Temporarily install the camshaft timing oil control valve assembly to the cylinder head cover sub-assembly with the bolt.

NOTICE:

If the camshaft timing oil control valve assembly has been struck or dropped, replace it.
Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).
Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control valve assembly.

Torque:

Specified tightening torque :

10 N·m {102 kgf·cm, 7 ft·lbf}

HINT:

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
Click here
When using a 10 mm union nut wrench (fulcrum length of 22 mm (0.866 in.)) + torque wrench (fulcrum length of 162 mm (6.38 in.)):
8.8 N*m (90 kgf*cm, 78 in.*lbf)

*a	10 mm Union Nut Wrench
*b	Torque Wrench Fulcrum Length

(d) Connect the camshaft timing oil control valve assembly connector.

2. INSPECT FOR ENGINE OIL LEAK

Click here