| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000001H0ST |
| Model Year Start: 2020 | Model: GR Corolla | Prod Date Range: [01/2019 - ] |
| Title: WIPER / WASHER: WIPER AND WASHER SYSTEM (for Gasoline Model): CUSTOMIZE PARAMETERS; 2020 - 2025 MY Corolla Corolla Hatchback GR Corolla [01/2019 - ] | ||
CUSTOMIZE PARAMETERS
CUSTOMIZE WIPER AND WASHER SYSTEM
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Customize Setting / Wiper.
(e) Select the setting by referring to the table below.
Wiper
|
Tester Display |
Description |
Default |
Setting |
ECU |
|---|---|---|---|---|
|
Rear Wiper Stop in Back Door/Trunk Lid Open |
Function to enable the back door open linked rear wiper suspend function |
Available |
0:Not Available,1:Available |
Main body ECU (Multiplex network body ECU) |
|
Rear Wiper Washer Function |
Function to enable the rear washer linked rear wiper operation function |
Available |
0:Not Available,1:Available |
Main body ECU (Multiplex network body ECU) |
|
Auto Rear Wiper in Reverse Setting |
Function to enable the R shift position linked rear wiper operation function |
Not Available |
00:Not Available,10:Once,11:Continuance |
Main body ECU (Multiplex network body ECU) |
|
|