Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001GZ70 |
Model Year Start: 2020 |
Model: Corolla |
Prod Date Range: [01/2019 - 09/2022] |
Title: CRUISE CONTROL: DYNAMIC RADAR CRUISE CONTROL SYSTEM (for HV Model): U031851; Software Incompatibility with Brake System Control Module Not Programmed; 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022] |
DTC
|
U031851
|
Software Incompatibility with Brake System Control Module Not Programmed
|
DESCRIPTION
If the forward recognition camera cannot verify the vehicle information sent from the skid control ECU (brake booster with master cylinder assembly), the forward recognition camera stores DTC U031851.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
DTC Output from
|
U031851
|
Software Incompatibility with Brake System Control Module Not Programmed
|
The vehicle information sent from the skid control ECU (brake booster with master cylinder assembly) cannot be verified by the forward recognition camera.
|
Forward recognition camera
|
Radar Cruise2
|
CAUTION / NOTICE / HINT
NOTICE:
-
When replacing the forward recognition camera, replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.
-
If the forward recognition camera has been replaced with a new one, it is necessary to perform forward recognition camera adjustment.
HINT:
Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.
One Time Recognition: Click here
Sequential Recognition: Click here
PROCEDURE
1.
|
REPLACE FORWARD RECOGNITION CAMERA
|
(a) Replace the forward recognition camera with a new one.
Click here
NEXT
|
|
|
(a) Clear the DTCs.
Powertrain > Radar Cruise2 > Clear DTCs
NEXT |
|
END
|
|