- Swing grill actuator assembly
- Radiator shutter sub-assembly
| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000001GYXI |
| Model Year Start: 2020 | Model: GR Corolla | Prod Date Range: [01/2019 - 09/2022] |
| Title: EXTERIOR PANELS / TRIM: GRILLE SHUTTER: REMOVAL; 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during grille shutter removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedure not Performed |
Link |
|---|---|---|---|
|
|
Change grille shutter control mode and/or perform initialization |
Grille Shutter system |
|
PROCEDURE
1. REMOVE FRONT BUMPER ASSEMBLY
Click here
![2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022]; EXTERIOR PANELS / TRIM: FRONT BUMPER (for Sedan without Illumination): REMOVAL](/t3Portal/stylegraphics/info.gif)
2. REMOVE LOWER FRONT BUMPER ABSORBER
Click here
3. REMOVE THERMISTOR ASSEMBLY
Click here
4. REMOVE RADIATOR SHUTTER SUB-ASSEMBLY
|
(a) Disconnect the connector. |
|
(b) Disengage the 2 clamps.
|
(c) Remove the 3 bolts. |
|
(d) Disengage the 2 guides as shown in the illustration to remove the radiator shutter sub-assembly.
|
Remove in this Direction |
|
|