Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001GYXI |
Model Year Start: 2020 |
Model: GR Corolla |
Prod Date Range: [01/2019 - 09/2022] |
Title: EXTERIOR PANELS / TRIM: GRILLE SHUTTER: REMOVAL; 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during grille shutter removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
-
Swing grill actuator assembly
-
Radiator shutter sub-assembly
|
Change grille shutter control mode and/or perform initialization
|
Grille Shutter system
|
|
PROCEDURE
1. REMOVE FRONT BUMPER ASSEMBLY
Click here
2. REMOVE LOWER FRONT BUMPER ABSORBER
Click here
3. REMOVE THERMISTOR ASSEMBLY
Click here
4. REMOVE RADIATOR SHUTTER SUB-ASSEMBLY
(a) Disconnect the connector.
|
|
(b) Disengage the 2 clamps.
(d) Disengage the 2 guides as shown in the illustration to remove the radiator shutter sub-assembly.
|
Remove in this Direction
|
|