| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM100000001GYKU |
| Model Year Start: 2020 | Model: Corolla | Prod Date Range: [01/2019 - 11/2022] |
| Title: 2ZR-FAE (ENGINE CONTROL): RELAY: ON-VEHICLE INSPECTION; 2020 - 2023 MY Corolla [01/2019 - 11/2022] | ||
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT CIRCUIT OPENING RELAY ASSEMBLY (C/OPN)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
3 - 5 |
Battery voltage not applied to terminals 1 and 2 |
10 kΩ or higher |
|
Battery voltage applied to terminals 1 and 2 |
Below 1 Ω |
If the result is not as specified, replace the circuit opening relay assembly (C/OPN).
2. INSPECT NO. 1 ELECTRONIC FUEL INJECTION MAIN RELAY (EFI-MAIN)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
3 - 5 |
Battery voltage not applied to terminals 1 and 2 |
10 kΩ or higher |
|
Battery voltage applied to terminals 1 and 2 |
Below 1 Ω |
If the result is not as specified, replace the No. 1 electronic fuel injection main relay (EFI-MAIN).
|
|