Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001GYKU |
Model Year Start: 2020 |
Model: Corolla |
Prod Date Range: [01/2019 - 11/2022] |
Title: 2ZR-FAE (ENGINE CONTROL): RELAY: ON-VEHICLE INSPECTION; 2020 - 2023 MY Corolla [01/2019 - 11/2022] |
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT CIRCUIT OPENING RELAY ASSEMBLY (C/OPN)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
3 - 5
|
Battery voltage not applied to terminals 1 and 2
|
10 kΩ or higher
|
Battery voltage applied to terminals 1 and 2
|
Below 1 Ω
|
If the result is not as specified, replace the circuit opening relay assembly (C/OPN).
2. INSPECT NO. 1 ELECTRONIC FUEL INJECTION MAIN RELAY (EFI-MAIN)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
3 - 5
|
Battery voltage not applied to terminals 1 and 2
|
10 kΩ or higher
|
Battery voltage applied to terminals 1 and 2
|
Below 1 Ω
|
If the result is not as specified, replace the No. 1 electronic fuel injection main relay (EFI-MAIN).
|