| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000001GYKC |
| Model Year Start: 2020 | Model: Corolla | Prod Date Range: [01/2019 - 09/2022] |
| Title: 2ZR-FAE (ENGINE CONTROL): ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION; 2020 - 2022 MY Corolla [01/2019 - 09/2022] | ||
INSTALLATION
PROCEDURE
1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR
HINT:
Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.
Click here
![2020 - 2023 MY Corolla [01/2019 - 11/2022]; 2ZR-FAE (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION](/t3Portal/stylegraphics/info.gif)
(a) Install a new gasket to the engine coolant temperature sensor.
|
(b) Using SST, install the engine coolant temperature sensor to the cylinder head sub-assembly. SST: 09817-33191 Torque: 19.6 N·m {200 kgf·cm, 14 ft·lbf} NOTICE: If the engine coolant temperature sensor has been struck or dropped, replace it. |
|
(c) Connect the engine coolant temperature sensor connector.
2. INSTALL BATTERY
Click here
3. ADD ENGINE COOLANT
Click here
4. INSPECT FOR COOLANT LEAK
Click here
5. PERFORM INITIALIZATION
(a) Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.
Click here
|
|