| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM100000001GYK5 |
| Model Year Start: 2020 | Model: Corolla | Prod Date Range: [01/2019 - 11/2022] |
| Title: 2ZR-FAE (ENGINE CONTROL): CRANKSHAFT POSITION SENSOR: REMOVAL; 2020 - 2023 MY Corolla [01/2019 - 11/2022] | ||
REMOVAL
PROCEDURE
1. REMOVE REAR ENGINE UNDER COVER RH
Click here
![2020 - 2023 MY Corolla [01/2019 - 11/2022]; MAINTENANCE: 2ZR-FAE DRIVE BELT: REMOVAL+](/t3Portal/stylegraphics/info.gif)
2. REMOVE CRANKSHAFT POSITION SENSOR
|
(a) Disconnect the crankshaft position sensor connector. |
|
(b) Remove the bolt and crankshaft position sensor from the cylinder block sub-assembly.
NOTICE:
If the crankshaft position sensor has been struck or dropped, replace it.
|
|