Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001GYK5
Model Year Start: 2020 Model: Corolla Prod Date Range: [01/2019 - 11/2022]
Title: 2ZR-FAE (ENGINE CONTROL): CRANKSHAFT POSITION SENSOR: REMOVAL; 2020 - 2023 MY Corolla [01/2019 - 11/2022]

REMOVAL

PROCEDURE

1. REMOVE REAR ENGINE UNDER COVER RH

Click here 2020 - 2023 MY Corolla [01/2019 - 11/2022]; MAINTENANCE: 2ZR-FAE DRIVE BELT: REMOVAL+

2. REMOVE CRANKSHAFT POSITION SENSOR

(a) Disconnect the crankshaft position sensor connector.

(b) Remove the bolt and crankshaft position sensor from the cylinder block sub-assembly.

NOTICE:

If the crankshaft position sensor has been struck or dropped, replace it.