| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM100000001GYK3 |
| Model Year Start: 2020 | Model: Corolla | Prod Date Range: [01/2019 - 11/2022] |
| Title: 2ZR-FAE (ENGINE CONTROL): CRANKSHAFT POSITION SENSOR: INSTALLATION; 2020 - 2023 MY Corolla [01/2019 - 11/2022] | ||
INSTALLATION
PROCEDURE
1. INSTALL CRANKSHAFT POSITION SENSOR
|
(a) Apply a light coat of engine oil to the O-ring of the crankshaft position sensor. NOTICE: If reusing the crankshaft position sensor, be sure to inspect the O-ring. |
|
(b) Install the crankshaft position sensor to the cylinder block sub-assembly with the bolt.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
NOTICE:
- If the crankshaft position sensor has been struck or dropped, replace it.
- Make sure that the O-ring is not cracked or does not move out of place during installation.
(c) Connect the crankshaft position sensor connector.
2. INSPECT FOR ENGINE OIL LEAK
Click here
![2020 MY Corolla [01/2019 - 03/2019]; MAINTENANCE: 2ZR-FAE OIL AND OIL FILTER: REPLACEMENT+](/t3Portal/stylegraphics/info.gif)
3. INSTALL REAR ENGINE UNDER COVER RH
Click here
|
|