Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001GYK1
Model Year Start: 2020 Model: Corolla Prod Date Range: [01/2019 - 11/2022]
Title: 2ZR-FAE (ENGINE CONTROL): CAMSHAFT POSITION SENSOR: INSTALLATION; 2020 - 2023 MY Corolla [01/2019 - 11/2022]

INSTALLATION

PROCEDURE

1. INSTALL CAMSHAFT POSITION SENSOR

(a) for Intake Side:

(1) Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

NOTICE:

If reusing the camshaft position sensor, be sure to inspect the O-ring.

*a

O-ring

(2) Install the camshaft position sensor to the cylinder head cover sub-assembly with the bolt.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

NOTICE:

  • If the camshaft position sensor has been struck or dropped, replace it.
  • Make sure that the O-ring is not cracked or does not move out of place during installation.

(3) Connect the camshaft position sensor connector.

(b) for Exhaust Side:

(1) Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

NOTICE:

If reusing the camshaft position sensor, be sure to inspect the O-ring.

*a

O-ring

(2) Install the camshaft position sensor to the cylinder head cover sub-assembly with the bolt.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

NOTICE:

  • If the camshaft position sensor has been struck or dropped, replace it.
  • Make sure that the O-ring is not cracked or does not move out of place during installation.

(3) Connect the camshaft position sensor connector.

2. INSPECT FOR ENGINE OIL LEAK

Click here 2020 MY Corolla [01/2019 - 03/2019]; MAINTENANCE: 2ZR-FAE OIL AND OIL FILTER: REPLACEMENT+ 2020 - 2021 MY Corolla [03/2019 - 06/2021]; MAINTENANCE: 2ZR-FAE OIL AND OIL FILTER: REPLACEMENT+ 2022 - 2023 MY Corolla [06/2021 - 11/2022]; MAINTENANCE: 2ZR-FAE OIL AND OIL FILTER: REPLACEMENT+