Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001GY0B |
Model Year Start: 2020 |
Model: Corolla Hatchback |
Prod Date Range: [01/2019 - 09/2022] |
Title: INTERIOR PANELS / TRIM: FRONT CONSOLE BOX (except G16E-GTS): INSTALLATION; 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV [01/2019 - 09/2022] |
INSTALLATION
PROCEDURE
1. INSTALL CONSOLE BOX ASSEMBLY
(a) Engage the 3 guides as shown in the illustration.
|
Install in this Direction
|
(b) Install console box assembly with the 4 bolts and 2 screws.
(c) Engage the clamp.
(d) Connect the 2 connectors.
2. INSTALL CONSOLE BOX CARPET
(a) Install the console box carpet.
3. INSTALL CONSOLE BOX CUP HOLDER ASSEMBLY (w/o Electric Parking Brake)
(a) Install the console box cup holder assembly with the 4 screws.
4. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY (w/o Electric Parking Brake)
(a) Engage the clamp.
(b) Connect the connector.
(c) Engage the 8 clips and 4 claws as shown in the illustration to install the console cup holder box sub-assembly.
|
Install in this Direction
|
5. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY (w/ Electric Parking Brake)
(a) Engage the clamp.
(b) Connect the 2 connectors.
|
|
(c) Engage the 8 clips and 4 claws as shown in the illustration to install the console cup holder box sub-assembly.
|
Install in this Direction
|
6. INSTALL UPPER FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transaxle)
(a) Connect each connector.
(b) Engage the 2 guides and 6 clips as shown in the illustration to install the upper front console panel sub-assembly.
|
Install in this Direction
|
7. INSTALL POSITION INDICATOR HOUSING ASSEMBLY (except Manual Transaxle)
(a) Connect each connector.
(b) Engage the 2 guides and 6 clips as shown in the illustration to install the position indicator housing assembly.
|
Install in this Direction
|
8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
(a) Turn the shift lever knob sub-assembly clockwise and install the shift lever knob sub-assembly.
|
Install in this Direction
|
9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for CVT)
K313: Click here
K120: Click here
10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for HV Model)
Click here
11. INSTALL FRONT CONSOLE UPPER PANEL GARNISH
(a) Engage the clamp.
(b) Connect the 3 connectors.
(c) Engage the 6 guides and 9 clips as shown in the illustration to install the front console upper panel garnish.
|
Install in this Direction
|
12. INSTALL FRONT NO. 2 CONSOLE BOX INSERT
(a) Engage the guide and 2 clips as shown in the illustration to install the front No. 2 console box insert.
|
Install in this Direction (1)
|
|
Install in this Direction (2)
|
13. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL
(a) Connect the connector.
(b) Engage the hook as shown in the illustration.
|
Install in this Direction (1)
|
|
Install in this Direction (2)
|
(c) Engage the 2 guides and 7 clips as shown in the illustration to install the lower center instrument panel finish panel.
|
Install in this Direction
|
14. INSTALL FRONT NO. 1 CONSOLE BOX INSERT
(a) Engage the guide and 3 clips as shown in the illustration to install the front No. 1 console box insert.
|
Install in this Direction (1)
|
|
Install in this Direction (2)
|
15. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
(a) Engage the clamp.
(b) Engage the 2 claws to connect the DLC3.
(c) Engage the guide and 2 claws as shown in the illustration.
|
Install in this Direction (1)
|
|
Install in this Direction (2)
|
(d) Install the No. 1 instrument panel under cover sub-assembly with the 2 screws.
|