Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001GXJQ
Model Year Start: 2020 Model: Corolla Prod Date Range: [01/2019 - 09/2022]
Title: LIGHTING (INT): LIGHTING SYSTEM (for HV Model): DATA LIST / ACTIVE TEST; 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022]

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

HINT:

Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Main Body / Data List.

(e) Read the Data List according to the display on the Techstream.

Body Electrical > Main Body > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

ACC SW

Power switch on (ACC) signal

OFF or ON

OFF: Power switch off

ON: Power switch on (ACC)

"ON" is also displayed for this item when the power switch is on (IG).

IG SW

Power switch on (IG) signal

OFF or ON

OFF: Power switch off

ON: Power switch on (IG)

"OFF" is also displayed for this item when the power switch is on (ACC).

RR Door Courtesy SW

Rear door courtesy light switch assembly RH signal

OFF or ON

OFF: Rear door RH closed

ON: Rear door RH open

-

RL Door Courtesy SW

Rear door courtesy light switch assembly LH signal

OFF or ON

OFF: Rear door LH closed

ON: Rear door LH open

-

Back Door Courtesy SW

Back door courtesy light switch signal

OFF or ON

OFF: Back door closed

ON: Back door open

Although this item is displayed on the Techstream, it is not applicable to this vehicle.

FR Door Lock Pos

Front door RH unlock detection switch signal

LOCK or UNLOCK

LOCK: Front door RH locked

UNLOCK: Front door RH unlocked

-

FR Door Courtesy SW

Front door courtesy light switch assembly RH signal

OFF or ON

OFF: Front door RH closed

ON: Front door RH open

-

FL Door Lock Pos

Front door LH unlock detection switch signal

LOCK or UNLOCK

LOCK: Front door LH locked

UNLOCK: Front door LH unlocked

-

FL Door Courtesy SW

Front door courtesy light switch assembly LH signal

OFF or ON

OFF: Front door LH closed

ON: Front door LH open

-

RR-Door Lock Pos SW

Rear door RH unlock detection switch signal

OFF or ON

OFF: Rear door RH locked

ON: Rear door RH unlocked

-

RL-Door Lock Pos SW

Rear door LH unlock detection switch signal

OFF or ON

OFF: Rear door LH locked

ON: Rear door LH unlocked

-

Luggage Courtesy SW

Luggage compartment door courtesy switch signal

OFF or ON

OFF: Luggage compartment door closed

ON: Luggage compartment door open

-

Interior Light Control

Operation of the illuminated entry system

OFF or ON

Customized value is displayed

-

I/L ON W/Door Key Unlock

Function that turns on the interior lights when the doors are unlocked

OFF or ON

Customized value is displayed

-

Lighting Time

Lighting time of the delay control function (illuminated entry system)

15 s, 7.5 s or 30 s

Customized value is displayed

-

Room Light when Aprchd

Function that turns on the interior lights when a key enters any actuation area

OFF or ON

Customized value is displayed

-

Inside Foot Light

Function that turns on the following lights:

  • Center tray illumination light (Instrument panel light assembly)*
  • Cup holder light (Console box pocket garnish)*

OFF or ON

Customized value is displayed

-

I/L when ACC OFF

Function that turns on the interior lights when the power switch is turned from on (ACC) or on (IG) to off

OFF or ON

Customized value is displayed

-

Light Control

Function that dims the following lights when the power switch is on (IG) and the shift lever is moved to any position other than P:

  • Door ambient illumination light (Front door trim board sub-assembly)*
  • Center tray illumination light (Instrument panel light assembly)*
  • Cup holder light (Console box pocket garnish)*

OFF or ON

Customized value is displayed

-

Interior Illumination Light

Function that turns on the following lights:

  • Door ambient illumination light (Front door trim board sub-assembly)*

OFF or ON

Customized value is displayed

-

  • *: w/ Ambient Illumination Light

ACTIVE TEST

HINT:

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / (desired system) / Active Test.

(e) Perform the Active Test according to the display on the Techstream.

Body Electrical > Main Body > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Illuminated Entry System

Turns on the lights that are controlled by the illuminated entry system*1

OFF or ON

Perform the Active Test with the door linked switch of the map light assembly on and switch of the rear room light (No. 1 room light assembly) in the DOOR position.

Fr Foot Light

  • Center tray illumination light (Instrument panel light assembly)*2
  • Cup holder light (Console box pocket garnish)*2

OFF or ON

Preconditions for using the Active Test to check dimmer controlled illumination:

  • Power switch on (IG)
  • Shift lever is in any position other than P

Relay for Interior Light Auto Cut Function

DOME CUT relay

OFF or ON

When performing this Active Test, turn all the interior lights on.

  • OFF: DOME CUT relay on (interior lights turn on)
  • ON: DOME CUT relay off (interior lights turn off)

Interior Illumination Light1

  • Door ambient illumination light LH (Front door trim board sub-assembly LH)*2
  • Door ambient illumination light RH (Front door trim board sub-assembly RH)*2

OFF or ON

Preconditions for using the Active Test to check dimmer controlled illumination:

  • Power switch on (IG)
  • Shift lever is in any position other than P
  • *1: Refer to System Description for the lights that are controlled by the illuminated entry system.

    Click here 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022]; LIGHTING (INT): LIGHTING SYSTEM (for HV Model): SYSTEM DESCRIPTION

  • *2: w/ Ambient Illumination Light

Body Electrical > Smart Key > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Power/Engine SW Light

Power switch illumination

OFF or ON

-