Last Modified: 07-31-2024 6.11:8.1.0 Doc ID: RM100000001GXJL
Model Year Start: 2020 Model: Corolla Prod Date Range: [01/2019 - 09/2022]
Title: LIGHTING (INT): LIGHTING SYSTEM (for HV Model): OPERATION CHECK; 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022]

OPERATION CHECK

INSPECT ILLUMINATED ENTRY SYSTEM OPERATION

NOTICE:

Perform this inspection with the customize parameters at the initial settings.

Click here 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022]; LIGHTING (INT): LIGHTING SYSTEM (for HV Model): CUSTOMIZE PARAMETERS

HINT:

Perform this inspection with the door linked switch of the map light assembly on and the switch of the rear room light (No. 1 room light assembly) in the DOOR position.

Control

Condition

Lights that Operate

Actuation Area-linked

With the power switch off and all of the doors closed and locked, enter an exterior detection area while carrying an electrical key transmitter and check that the lights that operate turn on for approximately 15 seconds and then turn off.
  • Map Light Assembly
  • Rear Room Light (No. 1 Room Light Assembly)
  • Door Ambient Illumination Light (Front Door Trim Board Sub-assembly)*
  • Center Tray Illumination Light (Instrument Panel Light Assembly)*
  • Cup Holder Light (Console Box Pocket Garnish)*

Door Lock/Unlock-linked

With the power switch off and all of the doors closed and locked, unlock any door using an unlock operation (key-linked, wireless or entry unlock operation) and check that the lights that operate turn on for 15 seconds and then turn off.
  • Map Light Assembly
  • Rear Room Light (No. 1 Room Light Assembly)
  • Door Ambient Illumination Light (Front Door Trim Board Sub-assembly)*
  • Center Tray Illumination Light (Instrument Panel Light Assembly)*
  • Cup Holder Light (Console Box Pocket Garnish)*

Door Open/Close-linked

With the power switch off and all of the doors closed, open any door and check that the lights that operate turn on. While the lights that operate are on, close all of the doors and check that the lights that operate turn off after approximately 15 seconds.
  • Map Light Assembly
  • Rear Room Light (No. 1 Room Light Assembly)
  • Door Ambient Illumination Light (Front Door Trim Board Sub-assembly)*
  • Center Tray Illumination Light (Instrument Panel Light Assembly)*
  • Cup Holder Light (Console Box Pocket Garnish)*

With the power switch off and all of the doors closed, open any front door and check that the light that operates turns on. While the light that operates is on, close the front doors and check that the light that operates turns off after approximately 40 seconds.

Power Switch Illumination

With the power switch in on (IG), open any door and check that the lights that operate turn on. While the lights that operate are on, close all of the doors and check that the lights that operate turn off.
  • Map Light Assembly
  • Rear Room Light (No. 1 Room Light Assembly)

Power Switch-linked

Turn the power switch from on (ACC) or on (IG) to off and check that the lights that operate turn on for approximately 15 seconds and then turn off.
  • Map Light Assembly
  • Rear Room Light (No. 1 Room Light Assembly)
  • Door Ambient Illumination Light (Front Door Trim Board Sub-assembly)*
  • Center Tray Illumination Light (Instrument Panel Light Assembly)*
  • Cup Holder Light (Console Box Pocket Garnish)*

Turn the power switch from on (ACC) or on (IG) to off and check that the light that operates turns on for approximately 40 seconds and then turns off.

Power Switch Illumination

Shift Position-linked

With the power switch on (ACC) or on (IG), move the shift lever from P to any other position and check that the lights that operate dim. While the lights that operate are on, move the shift lever to P and check that the lights that operate return to full brightness.
  • Door Ambient Illumination Light (Front Door Trim Board Sub-assembly)*
  • Center Tray Illumination Light (Instrument Panel Light Assembly)*
  • Cup Holder Light (Console Box Pocket Garnish)*
  • *: w/ Ambient Illumination Light

INSPECT BATTERY SAVING CONTROL OPERATION

(a) The operations and conditions of this control are described below.

Control

Condition

Lights that Operate

Battery Saving

When 20 minutes elapse after the power switch is turned from on (ACC) or on (IG) to off and the lights that operate remain on, the lights are turned off.

HINT:

Battery saving control is canceled when any of the following operations is performed before the lights are turned off by battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.

  • The power switch is turned on (ACC) or on (IG).
  • Any door is opened and closed.
  • Any door is unlocked.
  • The key enters any exterior actuation area.
  • Map Light Assembly
  • Rear Room Light (No. 1 Room Light Assembly)
  • Power Switch Illumination
  • Door Ambient Illumination Light (Front Door Trim Board Sub-assembly)*
  • Center Tray Illumination Light (Instrument Panel Light Assembly)*
  • Cup Holder Light (Console Box Pocket Garnish)*
  • No. 1 Luggage Compartment Light Assembly
  • Vanity Light Assembly

When 20 minutes elapse after the power switch is turned from on (ACC) or on (IG) to off and the light that operate remain on, the light is turned off.

HINT:

Battery saving control is canceled when any of the following operations is performed before the light is turned off by battery saving control. After the operation is performed, the light remain on for another 20 minutes and then the light is turned off.

  • Any front door is opened and closed.

Power Switch Illumination
  • *: w/ Ambient Illumination Light