Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001GXIT |
Model Year Start: 2020 |
Model: GR Corolla |
Prod Date Range: [01/2019 - 09/2022] |
Title: LIGHTING (INT): LIGHTING SYSTEM (for Gasoline Model): CUSTOMIZE PARAMETERS; 2020 - 2022 MY Corolla Corolla Hatchback GR Corolla [01/2019 - 09/2022] |
CUSTOMIZE PARAMETERS
CUSTOMIZE LIGHTING SYSTEM (INT)
NOTICE:
-
When the customer requests a change in a function, first make sure that the function can be customized.
-
Be sure to make a note of the current settings before customizing.
-
When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
(a) Customizing using the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Enter the following menus: Customize Setting / Illuminated Entry.
(5) Select the setting by referring to the table below.
Illuminated Entry
Tester Display
|
Description
|
Default
|
Setting
|
ECU
|
Lighting Time
|
Changes the lighting time of the following lights that are operated by the timer function when the door linked switch of the map light assembly is on and the switch of the rear room light (No. 1 room light assembly) is in the DOOR position:
-
Map light assembly
-
Rear room light (No. 1 room light assembly)
-
Door ambient illumination light (Front door trim board sub-assembly)*1*3
-
Center tray illumination light (Instrument panel light assembly)*1
-
Cup holder light (Console box pocket garnish)*1
|
15 s
|
10:30 s,00:15 s,01:7.5 s
|
Main body ECU (Multiplex network body ECU)
|
I/L when ACC OFF
|
Lights up the following lights automatically when the door linked switch of the map light assembly is on, the switch of the rear room light (No. 1 room light assembly) is in the DOOR position and the engine switch is turned from on (IG) or on (ACC) to off:
-
Map light assembly
-
Rear room light (No. 1 room light assembly)
-
Door ambient illumination light (Front door trim board sub-assembly)*1*3
-
Center tray illumination light (Instrument panel light assembly)*1
-
Cup holder light (Console box pocket garnish)*1
|
ON
|
0:OFF,1:ON
|
Main body ECU (Multiplex network body ECU)
|
I/L ON W/Door Key Unlock
|
Lights up the following lights automatically when the door linked switch of the map light assembly is on, the switch of the rear room light (No. 1 room light assembly) is in the DOOR position and the doors are unlocked by an unlock operation:
-
Map light assembly
-
Rear room light (No. 1 room light assembly)
-
Door ambient illumination light (Front door trim board sub-assembly)*1*3
-
Center tray illumination light (Instrument panel light assembly)*1
-
Cup holder light (Console box pocket garnish)*1
|
ON
|
0:OFF,1:ON
|
Main body ECU (Multiplex network body ECU)
|
Room Light when Aprchd
|
Lights up the following lights when the door linked switch of the map light assembly is on, the switch of the rear room light (No. 1 room light assembly) is in the DOOR position and the electrical key transmitter sub-assembly is brought near the vehicle*2:
-
Map light assembly
-
Rear room light (No. 1 room light assembly)
-
Door ambient illumination light (Front door trim board sub-assembly)*1*3
-
Center tray illumination light (Instrument panel light assembly)*1
-
Cup holder light (Console box pocket garnish)*1
|
ON
|
0:OFF,1:ON
|
Main body ECU (Multiplex network body ECU)
|
Inside Foot Light
|
Turns on the following lights:
-
Center tray illumination light (Instrument panel light assembly)*1
-
Cup holder light (Console box pocket garnish)*1
|
ON
|
0:OFF,1:ON
|
Main body ECU (Multiplex network body ECU)
|
Light Control
|
Dims the following lights when the engine switch is on (IG) and the shift lever is moved to any position other than P:
-
Door ambient illumination light (Front door trim board sub-assembly)*1*3
-
Center tray illumination light (Instrument panel light assembly)*1
-
Cup holder light (Console box pocket garnish)*1
|
ON
|
0:OFF,1:ON
|
Main body ECU (Multiplex network body ECU)
|
Interior Light Control
|
Lights up the following lights:
-
Map light assembly
-
Rear room light (No. 1 room light assembly)
-
Door ambient illumination light (Front door trim board sub-assembly)*1*3
-
Center tray illumination light (Instrument panel light assembly)*1
-
Cup holder light (Console box pocket garnish)*1
|
ON
|
0:OFF,1:ON
|
Main body ECU (Multiplex network body ECU)
|
Interior Illumination Light
|
Turns on the following lights:
-
Door ambient illumination light (Front door trim board sub-assembly)*1*3
|
ON
|
0:OFF,1:ON
|
Main body ECU (Multiplex network body ECU)
|
-
*1: w/ Ambient Illumination Light
-
*2: w/ Smart Key System
-
*3: for Sedan
(b) Customizing with the multi-display
(1) Turn the ignition switch to ON.
(2) Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Lights Settings.
(3) Select the setting by referring to the table below.
Display
|
Default
|
Content
|
Setting
|
Relevant ECU
|
Interior Lights Auto-off Timer
|
15 sec.
|
Changes the lighting time of the following lights that are operated by the timer function when the door linked switch of the map light assembly is on and the switch of the rear room light (No. 1 room light assembly) is in the DOOR position:
-
Map light assembly
-
Rear room light (No. 1 room light assembly)
-
Door ambient illumination light (Front door trim board sub-assembly)*1*2
-
Center tray illumination light (Instrument panel light assembly)*1
-
Cup holder light (Console box pocket garnish)*1
|
Off, 7.5 sec., 15 sec., 30 sec.
|
Main body ECU (Multiplex network body ECU)
|
-
*1: w/ Ambient Illumination Light
-
*2: for Sedan
|