|
Last Modified: 01-27-2025 |
6.11:8.1.0 |
Doc ID: RM100000001GX5N |
|
Model Year Start: 2020 |
Model: GR Corolla |
Prod Date Range: [01/2019 - 09/2022] |
|
Title: SUPPLEMENTAL RESTRAINT SYSTEMS: FRONT PASSENGER AIRBAG ASSEMBLY: INSTALLATION; 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022] |
INSTALLATION
PROCEDURE
1. INSTALL NO. 2 INSTRUMENT PANEL WIRE
(a) Connect the 2 airbag connectors and vent hole connector of the No. 2 instrument panel wire to the instrument panel passenger airbag assembly.
|
*a
|
Airbag Connector
|
|
*b
|
Airbag Connector Locking Button
|
|
*c
|
Vent Hole Connector
|
|
*d
|
Vent Hole Connector Locking Button
|
|
Push in this Direction
|
NOTICE:
-
When connecting any airbag connector, take care not to damage the airbag wire harness.
-
Be sure to only connect the connectors to each corresponding color.
(b) Push in the 2 airbag connector locking buttons and vent hole connector locking button to install the 2 airbag connectors and vent hole connector to the instrument panel passenger airbag assembly.
(c) Engage the clamp.
2. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY
|
(b) Push in the instrument panel passenger airbag assembly to engage the 3 hooks.
|
|
|
(c) Install the instrument panel passenger airbag assembly with the 2 screws.
|
|
3. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
Click here
4. CONNECT NO. 2 INSTRUMENT PANEL WIRE
(a) Check that the ignition switch (for Gasoline Model) or power switch (for HV Model) is off.
(b) Check that the cable is disconnected from the negative (-) auxiliary battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.
(c) Before connecting the connector, check that the position of the white housing lock is as shown in the illustration.
|
(d) Connect the No. 2 instrument panel wire.
NOTICE:
When connecting any airbag connector, take care not to damage the airbag wire harness.
HINT:
-
Be sure to connect the connector until it is locked (when locking, make sure that a click sound can be heard).
-
When the connector is locked, the white housing lock will slide. Do not hold the white housing lock as it may result in an insecure connection.
|
|
5. INSTALL UPPER INSTRUMENT PANEL ASSEMBLY
Click here
|