| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000001GWZ6 |
| Model Year Start: 2020 | Model: Corolla Hatchback | Prod Date Range: [01/2019 - ] |
| Title: STEERING COLUMN: STEERING WHEEL (except G16E-GTS): INSTALLATION; 2020 - 2025 MY Corolla Corolla Hatchback Corolla HV [01/2019 - ] | ||
INSTALLATION
CAUTION / NOTICE / HINT
NOTICE:
- Do not remove/install the spiral cable with sensor sub-assembly with the auxiliary battery connected and the ignition switch (for Gasoline Model) or power switch (for HV Model) on (IG).
- Do not rotate the spiral cable with sensor sub-assembly without the steering wheel assembly installed, with the auxiliary battery connected and the ignition switch (for Gasoline Model) or power switch (for HV Model) on (IG).
- Ensure that the steering wheel assembly is installed and aligned straight when inspecting the steering sensor.
PROCEDURE
1. INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) (w/ Shift Paddle Switch)
Click here
![2019 - 2025 MY Corolla Corolla Hatchback [06/2018 - ]; K120 / K121 (CVT): SHIFT PADDLE SWITCH: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
2. INSTALL STEERING PAD SWITCH ASSEMBLY
Click here
3. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
4. INSPECT AND ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY
Click here
5. INSTALL STEERING WHEEL ASSEMBLY
|
(a) Align the matchmarks on the steering wheel assembly and steering main shaft to install the steering wheel assembly. |
|
(b) Using a 10 mm hexagon socket wrench, install the steering wheel assembly set bolt.
Torque:
62 N·m {632 kgf·cm, 46 ft·lbf}
(c) Connect each connector.
6. INSTALL HORN BUTTON ASSEMBLY
Click here
7. CHECK STEERING WHEEL CENTER POINT
|
|