Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001GWZ0
Model Year Start: 2020 Model: GR Corolla Prod Date Range: [01/2019 - 09/2022]
Title: STEERING COLUMN: STEERING COLUMN ASSEMBLY: DISASSEMBLY; 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022]

DISASSEMBLY

CAUTION / NOTICE / HINT

NOTICE:

  • Before replacing the steering lock actuator assembly, refer to Registration (w/ Smart Key System).

    for HV Model: Click here 2020 MY Corolla Corolla HV [01/2019 - 04/2020]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function, HV Model): REGISTRATION 2021 - 2022 MY Corolla Corolla HV [04/2020 - 09/2022]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function, HV Model): REGISTRATION

    for Gasoline Model: Click here 2020 MY Corolla Corolla Hatchback GR Corolla [01/2019 - 09/2019]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function, Gasoline Model): REGISTRATION 2020 MY Corolla Corolla Hatchback GR Corolla [09/2019 - 04/2020]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function, Gasoline Model): REGISTRATION 2021 - 2022 MY Corolla Corolla Hatchback GR Corolla [04/2020 - 09/2022]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function, Gasoline Model): REGISTRATION

  • Do not drop the power steering ECU with motor assembly, strike it with tools or subject it to impacts.
  • If the power steering ECU with motor assembly is subjected to an impact, replace it with a new one.
  • Do not pull the wire harness.
  • Do not allow any moisture to come into contact with the power steering ECU with motor assembly.
  • Do not loosen any bolts not mentioned in the procedure.
  • Do not allow any foreign matter to contaminate the power steering ECU with motor assembly.

PROCEDURE

1. REMOVE UPPER STEERING COLUMN BRACKET WITH SWITCH ASSEMBLY (w/o Smart Key System)

(a) Secure the steering column assembly in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.

(b) Using a drill, drill a hole in the 2 steering lock set bolts and insert a screw extractor.

(c) Using the screw extractor, remove the 2 steering lock set bolts, upper steering column clamp and upper steering column bracket with switch assembly.

2. REMOVE STEERING LOCK ACTUATOR ASSEMBLY (w/ Smart Key System)

(a) Secure the steering column assembly in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.

(b) Using SST, strike a punch mark for drilling in the center of the steering lock set bolt.

SST: 09622-00010

NOTICE:

When striking the punch mark, in order to prevent impact force from being applied to the steering lock actuator assembly, do not use a normal center punch.

(c) Using a drill, drill a hole in the 2 steering lock set bolts and insert a screw extractor.

(d) Using the screw extractor, remove the 2 steering lock set bolts, upper steering column clamp and steering lock actuator assembly.

3. REMOVE POWER STEERING ECU WITH MOTOR ASSEMBLY

Click here 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 03/2019]; POWER ASSIST SYSTEMS: POWER STEERING ECU: REMOVAL+ 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 09/2019]; POWER ASSIST SYSTEMS: POWER STEERING ECU: REMOVAL+ 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2019 - 09/2022]; POWER ASSIST SYSTEMS: POWER STEERING ECU: REMOVAL+

4. REMOVE ELECTRIC POWER STEERING MOTOR SHAFT DAMPER

Click here 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 03/2019]; POWER ASSIST SYSTEMS: POWER STEERING ECU: REMOVAL+ 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 09/2019]; POWER ASSIST SYSTEMS: POWER STEERING ECU: REMOVAL+ 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2019 - 09/2022]; POWER ASSIST SYSTEMS: POWER STEERING ECU: REMOVAL+

5. REMOVE IGNITION SWITCH LOCK CYLINDER ASSEMBLY (w/o Smart Key System)

(a) Turn the ignition switch to ACC.

*a

LOCK

*b

ACC

Push

Pull

(b) Insert the tip of a screwdriver into the hole in the upper steering column bracket assembly, as shown in the illustration, and pull out the ignition switch lock cylinder assembly.

6. REMOVE UN-LOCK WARNING SWITCH ASSEMBLY (w/o Smart Key System)

(a) Remove the un-lock warning switch assembly by pushing up the center part and releasing the 2 claws.

*a

Center Part

Slide in this direction

HINT:

Slide the un-lock warning switch assembly in the direction shown by the arrow in the illustration to remove it.

7. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY (w/o Smart Key System)

(a) Disengage the 2 claws and remove the ignition or starter switch assembly from the upper steering column bracket assembly.