Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001GWZ0 |
Model Year Start: 2020 |
Model: GR Corolla |
Prod Date Range: [01/2019 - 09/2022] |
Title: STEERING COLUMN: STEERING COLUMN ASSEMBLY: DISASSEMBLY; 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022] |
DISASSEMBLY
CAUTION / NOTICE / HINT
PROCEDURE
1. REMOVE UPPER STEERING COLUMN BRACKET WITH SWITCH ASSEMBLY (w/o Smart Key System)
(a) Secure the steering column assembly in a vise between aluminum plates.
NOTICE:
Do not overtighten the vise.
(b) Using a drill, drill a hole in the 2 steering lock set bolts and insert a screw extractor.
(c) Using the screw extractor, remove the 2 steering lock set bolts, upper steering column clamp and upper steering column bracket with switch assembly.
|
|
2. REMOVE STEERING LOCK ACTUATOR ASSEMBLY (w/ Smart Key System)
(a) Secure the steering column assembly in a vise between aluminum plates.
NOTICE:
Do not overtighten the vise.
(b) Using SST, strike a punch mark for drilling in the center of the steering lock set bolt.
SST: 09622-00010
NOTICE:
When striking the punch mark, in order to prevent impact force from being applied to the steering lock actuator assembly, do not use a normal center punch.
|
|
(c) Using a drill, drill a hole in the 2 steering lock set bolts and insert a screw extractor.
(d) Using the screw extractor, remove the 2 steering lock set bolts, upper steering column clamp and steering lock actuator assembly.
|
|
3. REMOVE POWER STEERING ECU WITH MOTOR ASSEMBLY
Click here
4. REMOVE ELECTRIC POWER STEERING MOTOR SHAFT DAMPER
Click here
5. REMOVE IGNITION SWITCH LOCK CYLINDER ASSEMBLY (w/o Smart Key System)
(a) Turn the ignition switch to ACC.
*a
|
LOCK
|
*b
|
ACC
|
|
Push
|
|
Pull
|
(b) Insert the tip of a screwdriver into the hole in the upper steering column bracket assembly, as shown in the illustration, and pull out the ignition switch lock cylinder assembly.
6. REMOVE UN-LOCK WARNING SWITCH ASSEMBLY (w/o Smart Key System)
(a) Remove the un-lock warning switch assembly by pushing up the center part and releasing the 2 claws.
*a
|
Center Part
|
|
Slide in this direction
|
HINT:
Slide the un-lock warning switch assembly in the direction shown by the arrow in the illustration to remove it.
7. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY (w/o Smart Key System)
(a) Disengage the 2 claws and remove the ignition or starter switch assembly from the upper steering column bracket assembly.
|
|
|