Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001GV74 |
Model Year Start: 2020 |
Model: GR Corolla |
Prod Date Range: [01/2019 - 11/2022] |
Title: CLUTCH: CLUTCH PEDAL SWITCH: INSPECTION; 2020 - 2023 MY Corolla Corolla Hatchback GR Corolla [01/2019 - 11/2022] |
INSPECTION
PROCEDURE
1. INSPECT CLUTCH START SWITCH ASSEMBLY
(a) Check the resistance.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
1 - 2
|
On (Pushed in)
|
Below 1 Ω
|
Off (Released)
|
10 kΩ or higher
|
If the result is not as specified, replace the clutch start switch assembly.
|
|
*a
|
Component without harness connected
(Clutch Start Switch Assembly)
|
*b
|
11.65 to 12.35 mm (0.459 to 0.486 in.)
|
*c
|
On
|
*d
|
Off
|
|
|
2. INSPECT CLUTCH SWITCH ASSEMBLY (w/o Clutch Pedal Stroke Sensor Assembly)
(a) Check the resistance.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
1 - 2
|
On (Pushed in)
|
Below 1 Ω
|
Off (Released)
|
10 kΩ or higher
|
If the result is not as specified, replace the clutch switch assembly.
|
|
*a
|
Component without harness connected
(Clutch Switch Assembly)
|
*b
|
6.5 to 7.5 mm (0.256 to 0.295 in.)
|
*c
|
On
|
*d
|
Off
|
|
|
|