Last Modified: 06-05-2026 6.11:8.1.0 Doc ID: RM100000001GV74
Model Year Start: 2020 Model: GR Corolla Prod Date Range: [01/2019 - 11/2022]
Title: CLUTCH: CLUTCH PEDAL SWITCH: INSPECTION; 2020 - 2023 MY GR Corolla Corolla Corolla Hatchback [01/2019 - 11/2022]

INSPECTION

PROCEDURE

1. INSPECT CLUTCH START SWITCH ASSEMBLY

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance

Tester Connection

Condition

Specified Condition

1 - 2

On (Pushed in)

Below 1 Ω

Off (Released)

10 kΩ or higher

If the result is not as specified, replace the clutch start switch assembly.

*a

Component without harness connected

(Clutch Start Switch Assembly)

*b

11.65 to 12.35 mm (0.459 to 0.486 in.)

*c

On

*d

Off

2. INSPECT CLUTCH SWITCH ASSEMBLY (w/o Clutch Pedal Stroke Sensor Assembly)

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance

Tester Connection

Condition

Specified Condition

1 - 2

On (Pushed in)

Below 1 Ω

Off (Released)

10 kΩ or higher

If the result is not as specified, replace the clutch switch assembly.

*a

Component without harness connected

(Clutch Switch Assembly)

*b

6.5 to 7.5 mm (0.256 to 0.295 in.)

*c

On

*d

Off