Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001GV74
Model Year Start: 2020 Model: GR Corolla Prod Date Range: [01/2019 - 11/2022]
Title: CLUTCH: CLUTCH PEDAL SWITCH: INSPECTION; 2020 - 2023 MY Corolla Corolla Hatchback GR Corolla [01/2019 - 11/2022]

INSPECTION

PROCEDURE

1. INSPECT CLUTCH START SWITCH ASSEMBLY

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 - 2

On (Pushed in)

Below 1 Ω

Off (Released)

10 kΩ or higher

If the result is not as specified, replace the clutch start switch assembly.

*a

Component without harness connected

(Clutch Start Switch Assembly)

*b

11.65 to 12.35 mm (0.459 to 0.486 in.)

*c

On

*d

Off

2. INSPECT CLUTCH SWITCH ASSEMBLY (w/o Clutch Pedal Stroke Sensor Assembly)

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 - 2

On (Pushed in)

Below 1 Ω

Off (Released)

10 kΩ or higher

If the result is not as specified, replace the clutch switch assembly.

*a

Component without harness connected

(Clutch Switch Assembly)

*b

6.5 to 7.5 mm (0.256 to 0.295 in.)

*c

On

*d

Off