| Last Modified: 06-05-2026 | 6.11:8.1.0 | Doc ID: RM100000001GV6K |
| Model Year Start: 2020 | Model: GR Corolla | Prod Date Range: [01/2019 - ] |
| Title: CLUTCH: CLUTCH STROKE SENSOR: ON-VEHICLE INSPECTION; 2020 - 2026 MY GR Corolla Corolla Corolla Hatchback [01/2019 - ] | ||
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT CLUTCH PEDAL STROKE SENSOR ASSEMBLY
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Powertrain / Engine / Data List / Clutch Stroke Sensor Voltage.
Powertrain > Engine > Data List
(e) Read the values displayed on the Techstream.
Standard Voltage
|
Techstream Display |
Condition |
Specified Condition |
|---|---|---|
|
Clutch Stroke Sensor Voltage |
Clutch pedal fully released |
0.96 to 1.04 V |
|
Not depressed → Fully depressed (Clutch pedal should be operated slowly) |
Value changes progressively (Only increase) |
If the result is not as specified, check the clutch pedal stroke sensor assembly, wire harness and ECM.
|
|