| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000001GV6K |
| Model Year Start: 2020 | Model: GR Corolla | Prod Date Range: [01/2019 - ] |
| Title: CLUTCH: CLUTCH STROKE SENSOR: ON-VEHICLE INSPECTION; 2020 - 2025 MY Corolla Corolla Hatchback GR Corolla [01/2019 - ] | ||
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT CLUTCH PEDAL STROKE SENSOR ASSEMBLY
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Powertrain / Engine / Data List / Clutch Stroke Sensor Voltage.
Powertrain > Engine > Data List
|
Tester Display |
|---|
|
Clutch Stroke Sensor Voltage |
(e) Read the values displayed on the Techstream.
Standard Voltage:
|
Techstream Display |
Condition |
Specified Condition |
|---|---|---|
|
Clutch Stroke Sensor Voltage |
Clutch pedal fully released |
0.96 to 1.04 V |
|
Not depressed → Fully depressed (Clutch pedal should be operated slowly) |
Value changes progressively (Only increase) |
If the result is not as specified, check the clutch pedal stroke sensor assembly, wire harness and ECM.
|
|