Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001GUTO |
Model Year Start: 2020 |
Model: GR Corolla |
Prod Date Range: [01/2019 - 09/2022] |
Title: METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM (for Gasoline Model): Speedometer Malfunction; 2020 - 2022 MY Corolla Corolla Hatchback GR Corolla [01/2019 - 09/2022] |
DESCRIPTION
The combination meter assembly receives vehicle speed signals from the skid control ECU (brake actuator assembly) via CAN communication. The speed sensor detects the wheel speed and sends the appropriate signals to the skid control ECU (brake actuator assembly). The skid control ECU (brake actuator assembly) supplies power to the vehicle speed sensor. The skid control ECU (brake actuator assembly) detects vehicle speed signals based on pulses of the voltage.
HINT:
Factors that affect the indicated vehicle speed include the tire size, tire inflation, and tire wear. The speed indicated on the speedometer has an allowable margin of error.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
PROCEDURE
1.
|
CHECK CAN COMMUNICATION SYSTEM
|
(a) Check if CAN communication DTCs are output.
Click here
Result
|
Proceed to
|
DTCs are not output
|
A
|
DTCs are output
|
B
|
A
|
|
|
2.
|
CHECK FOR DTC (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)
|
(a) Check if electronically controlled brake system DTCs are output.
Chassis > Brake > Trouble Codes
Result
|
Proceed to
|
DTCs are not output
|
A
|
DTCs are output
|
B
|
A
|
|
|
3.
|
PERFORM ACTIVE TEST USING TECHSTREAM
|
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Combination Meter / Active Test.
(e) Perform the Active Test according to the display on the Techstream.
Body Electrical > Combination Meter > Active Test
Tester Display
|
Measurement Item
|
Control Range
|
Diagnostic Note
|
Speed Signal Input (0)
|
Vehicle speed test signal input*
(0 km/h, 0 mph)
|
ON
|
-
|
Speed Signal Input (40)
|
Vehicle speed test signal input*
(40 km/h, 40 mph)
|
ON
|
The value displayed on the speedometer may deviate.
for Speedometer with Imperial Units for Main Scale
-
Reference 40 (mph):
39.6 to 42.4
for Speedometer with Metric Units for Main Scale
-
Reference 40 (km/h):
38.8 to 43.3
|
Speed Signal Input (80)
|
Vehicle speed test signal input*
(80 km/h, 80 mph)
|
ON
|
The value displayed on the speedometer may deviate.
for Speedometer with Imperial Units for Main Scale
-
Reference 80 (mph):
80.3 to 83.5
for Speedometer with Metric Units for Main Scale
-
Reference 80 (km/h):
79.4 to 84.4
|
Speed Signal Input (120)
|
Vehicle speed test signal input*
(120 km/h, 120 mph)
|
ON
|
The value displayed on the speedometer may deviate.
for Speedometer with Imperial Units for Main Scale
-
Reference 120 (mph):
121.3 to 124.5
for Speedometer with Metric Units for Main Scale
-
Reference 120 (km/h):
120.4 to 125.4
|
Speed Signal Input (160)
|
Vehicle speed test signal input*
(160 km/h, 160 mph)
|
ON
|
The value displayed on the speedometer may deviate.
for Speedometer with Metric Units for Main Scale
-
Reference 160 (km/h):
161.3 to 166.3
|
Speed Signal Input (200)
|
Vehicle speed test signal input*
(200 km/h, 200 mph)
|
ON
|
The value displayed on the speedometer may deviate.
for Speedometer with Metric Units for Main Scale
-
Reference 200 (km/h):
202.3 to 207.3
|
Speed Signal Input (240)
|
Vehicle speed test signal input*
(240 km/h, 240 mph)
|
ON
|
-
|
-
*: When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
Body Electrical > Combination Meter > Active Test
Tester Display
|
Speed Signal Input (0)
|
Body Electrical > Combination Meter > Active Test
Tester Display
|
Speed Signal Input (40)
|
Body Electrical > Combination Meter > Active Test
Tester Display
|
Speed Signal Input (80)
|
Body Electrical > Combination Meter > Active Test
Tester Display
|
Speed Signal Input (120)
|
Body Electrical > Combination Meter > Active Test
Tester Display
|
Speed Signal Input (160)
|
Body Electrical > Combination Meter > Active Test
Tester Display
|
Speed Signal Input (200)
|
Body Electrical > Combination Meter > Active Test
Tester Display
|
Speed Signal Input (240)
|
OK:
Speedometer indication is normal.
|