Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001GUSY |
Model Year Start: 2020 |
Model: GR Corolla |
Prod Date Range: [01/2019 - 09/2022] |
Title: LIGHTING (EXT): HEADLIGHT ASSEMBLY: REMOVAL; 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during headlight assembly removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
Headlight ECU sub-assembly LH
|
-
Synchronize the vehicle information
-
Perform headlight ECU sub-assembly LH initialization
|
Lighting system (w/ AFS)(EXT)
|
|
HINT:
-
Use the same procedure for the RH side and LH side.
-
The following procedure is for the LH side.
PROCEDURE
1. REMOVE FRONT BUMPER ASSEMBLY
for Hatchback:
Click here
w/ Illumination:
Click here
w/o Illumination:
Click here
2. REMOVE HEADLIGHT ASSEMBLY
(a) Apply protective tape around the headlight assembly as shown in the illustration.
|
Protective Tape
|
(b) Remove the bolt and 3 screws.
|
|
(c) Disengage the guide to separate the headlight assembly as shown in the illustration.
|
Remove in this Direction
|
(d) Disengage each clamp.
|
|
(e) Disconnect each connector to remove the headlight assembly.
|