Last Modified: 07-31-2024 6.11:8.1.0 Doc ID: RM100000001GUSP
Model Year Start: 2020 Model: GR Corolla Prod Date Range: [01/2019 - 03/2019]
Title: METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM (for Gasoline Model): DATA LIST / ACTIVE TEST; 2020 MY Corolla Corolla Hatchback GR Corolla [01/2019 - 03/2019]

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

HINT:

Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch ON.

(c) Turn the Techstream on.

(d) Enter the following menus:

  • Body Electrical / Combination Meter / Data List.
  • Chassis / Brake / Data List.
  • Powertrain / Engine / Data List. (for M20A-FKS)
  • Powertrain / Engine and ECT / Data List. (for 2ZR-FAE)

(e) Read the Data List according to the display on the Techstream.

NOTICE:

Depending on the vehicle specifications, some of the Data List items in the following table will not be displayed on the Techstream.

Body Electrical > Combination Meter > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Total Distance Traveled

Total distance traveled

Min.: 0, Max.: 16777215

-

-

Total Distance Traveled - Unit

Total distance traveled unit

km or mile

-

-

ODO/TRIP Change Switch

ODO/TRIP switch (Combination meter assembly)

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Trip Reset Switch

Trip reset switch

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Multi Display Select Switch

DISP switch

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Meter Day Mode Switch

Tail cancel switch (Light control rheostat)

OFF or ON

OFF: Tail cancel switch off

ON: Tail cancel switch on

When the light control rheostat is moved to the highest position, the tail cancel switch will turn on.

Light Control Switch (UP)

Light control rheostat up switch

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Light Control Switch (DOWN)

Light control rheostat down switch

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Light Control Switch (Single)

Light control rheostat switch

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Timer Switch H on Combination Meter

Clock (+) switch (Combination meter assembly)

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Timer Switch M on Combination Meter

Clock (-) switch (Combination meter assembly)

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Timer Switch 00 on Combination Meter

Clock (00) switch (Combination meter assembly)

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Timer Switch on Combination Meter

Clock switch (Combination meter assembly)

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Multi Switch (Up)

Up switch on steering pad switch

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Multi Switch (Down)

Down switch on steering pad switch

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Multi Switch (Left)

Left switch on steering pad switch

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Multi Switch (Right)

Right switch on steering pad switch

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Multi Switch (Enter)

OK switch on steering pad switch

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Multi Switch (Back)

Back switch on steering pad switch

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Multi Switch (Menu)

Menu switch on steering pad switch

OFF or ON

OFF: Switch released

ON: Switch pushed

-

+B Voltage

Battery voltage

Min.: 0.0 V, Max.: 25.5 V or Unset

11 to 14 V

-

Fuel Input

Fuel input

Min.: 0.00 L, Max.: 655.35 L or Unset

  • Fuel receiver gauge indicates F: 45.0 L
  • Fuel receiver gauge indicates 3/4: 35.0 L
  • Fuel receiver gauge indicates 1/2: 25.0 L
  • Fuel receiver gauge indicates 1/4: 15.0 L
  • Fuel receiver gauge indicates E: 5.0 L

-

Sub Fuel Input

Sub fuel input

Min.: 0.00 L, Max.: 655.35 L or Unset

Current fuel level displayed

-

Rheostat value

Light control rheostat input

Min.: 0.00%, Max.: 100.01% or Unset

Increases from 0 to 100 as light control rheostat turned from low to high

"Unset" is displayed when the light control rheostat is moved to the highest position (tail cancel switch is turned on).

Vehicle Speed Meter

Vehicle speed

Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) or Unset

Almost the same as actual vehicle speed

-

Engine RPM

Engine speed

Min.: 0 rpm, Max.: 12701 rpm or Unset

Almost the same as actual tachometer

-

Washer Level Warning Switch

Washer fluid level warning switch

OFF or ON

OFF: Washer fluid level not low

ON: Washer fluid level low

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

Driver Buckle Switch

Seat belt buckle switch

(for Driver seat)

Fastened or Not Fastened

Fastened: Driver seat belt buckle switch fastened

Not Fastened: Driver seat belt buckle switch unfastened

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

Passenger Buckle Switch

Seat belt buckle switch

(for Front passenger seat)

Fastened or Not Fastened

Fastened: Front passenger seat belt buckle switch fastened

Not Fastened: Front passenger seat belt buckle switch unfastened

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

(The occupant detection sensor circuit and buckle switch circuit are separate.)

Passenger Occupant Detection Switch

Occupant detection sensor

(for Front passenger seat)

OFF or ON

OFF: Front passenger seat not occupied

ON: Front passenger seat occupied

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

(The occupant detection sensor circuit and buckle switch circuit are separate.)

Passenger Buckle / Occupant Detection Warning Switch

Seat belt buckle switch and occupant detection sensor

(for Front passenger seat)

OFF or ON

OFF: Front passenger seat belt fastened or front passenger seat not occupied

ON: Front passenger seat belt unfastened and front passenger seat occupied

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

(The occupant detection sensor circuit and buckle switch circuit are the same.)

Rear Right Seat Buckle / Occupant Detection Warning Switch

Seat belt buckle switch and occupant detection sensor

(for Rear right seat)

OFF or ON

OFF: Rear seat belt RH fastened

ON: Rear seat belt RH unfastened

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

Rear Left Seat Buckle / Occupant Detection Warning Switch

Seat belt buckle switch and occupant detection sensor

(for Rear left seat)

OFF or ON

OFF: Rear seat belt LH fastened

ON: Rear seat belt LH unfastened

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

Rear Center Seat Buckle / Occupant Detection Warning Switch

Seat belt buckle switch and occupant detection sensor

(for Rear center seat)

OFF or ON

OFF: Rear seat belt center fastened

ON: Rear seat belt center unfastened

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

3rd Right Seat Buckle / Occupant Detection Warning Switch

Seat belt buckle switch and occupant detection sensor

(for Rear No. 2 right seat)

OFF or ON

OFF: Rear No. 2 seat belt RH fastened or rear No. 2 right seat not occupied

ON: Rear No. 2 seat belt RH unfastened and rear No. 2 right seat occupied

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

3rd Left Seat Buckle / Occupant Detection Warning Switch

Seat belt buckle switch and occupant detection sensor

(for Rear No. 2 left seat)

OFF or ON

OFF: Rear No. 2 seat belt LH fastened or rear No. 2 left seat not occupied

ON: Rear No. 2 seat belt LH unfastened and rear No. 2 left seat occupied

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

3rd Center Seat Buckle / Occupant Detection Warning Switch

Seat belt buckle switch and occupant detection sensor

(for Rear No. 2 center seat)

OFF or ON

OFF: Rear No. 2 seat belt center fastened or rear No. 2 center seat not occupied

ON: Rear No. 2 seat belt center unfastened and rear No. 2 center seat occupied

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

Turn Signal Switch (Left)

LH turn signal switch

OFF or ON

OFF: LH turn signal switch off

ON: LH turn signal switch on

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

Turn Signal Switch (Right)

RH turn signal switch

OFF or ON

OFF: RH turn signal switch off

ON: RH turn signal switch on

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

Turn Switch Signal (Full Turn)

Turn signal switch signal

OFF or ON

OFF: LH and RH turn signal switch off

ON: LH or RH turn signal switch on

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

Hazard Flasher Switch

Hazard warning signal switch

OFF or ON

OFF: Hazard warning signal switch off

ON: Hazard warning signal switch on

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

Ambient Temperature (Celsius)

Outside temperature

(Celsius)

Min.: -40.0°C, Max.: 87.1°C or Unset

Almost the same as actual outside temperature

-

Ambient Temperature (Fahrenheit)

Outside temperature

(Fahrenheit)

Min.: -40°F, Max.: 215°F or Unset

Almost the same as actual outside temperature

-

Lighting System

Existence of Headlight ECU sub-assembly

Without or With

Without: w/o Headlight ECU Sub-assembly

With: w/ Headlight ECU Sub-assembly

-

Back Door System

Existence of power back door system

Without or With

Without: w/o Power Back Door System

With: w/ Power Back Door System

-

Oil Pressure Switch

Engine oil pressure switch

OFF or ON

OFF: Engine started

ON: Engine not started

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

Oil Level Switch

Engine oil level sensor

OFF or ON

OFF: Engine oil level not low

ON: Engine oil level low

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

Water Level Switch

Fuel sediment switch

OFF or ON

OFF: Less than a large amount of water in fuel

ON: Large amount of water in fuel

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

Fuel Filter Switch

Fuel filter warning signal

OFF or ON

OFF: Fuel filter warning light off

ON: Fuel filter warning light on

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

Coolant Temperature

Engine coolant temperature

Min.: 0.0°C, Max.: 127.1°C or Unset

75 to 100°C: After warming up engine

-

Integrated value for Maintenance

Maintenance required reminder value

Min.: 0 miles, Max.: 25401 miles or Unset

Driving distance after performing maintenance required reminder reset procedure displayed

-

Parking Brake Switch

Parking brake switch

OFF or ON

OFF: Parking brake released

ON: Parking brake applied

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

Brake Fluid Amount

Brake fluid level

OK or Low

OK: Brake fluid level normal

Low: Brake fluid level abnormal

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

Brake Negative Pressure

Brake vacuum pressure

OK or NG

OK: Brake vacuum pressure normal

NG: Brake vacuum pressure abnormal

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

TPMS System

Existence of tire pressure warning system

Without or With

Without: w/o Tire Pressure Warning System

With: w/ Tire Pressure Warning System

-

VGRS System

Existence of variable gear ratio steering system

Without or With

Without: w/o Variable Gear Ratio Steering System

With: w/ Variable Gear Ratio Steering System

-

VSC System

Existence of electronically controlled brake system

Without or With

Without: w/o Electronically Controlled Brake System

With: w/ Electronically Controlled Brake System

-

DRS System

Existence of dynamic rear steering system

Without or With

Without: w/o Dynamic Rear Steering System

With: w/ Dynamic Rear Steering System

-

Pop Up Hood System

Existence of pop up hood

Without or With

Without: w/o Pop up Hood

With: w/ Pop up Hood

-

AVS System

Existence of adaptive variable suspension system

Without or With

Without: w/o Adaptive Variable Suspension System

With: w/ Adaptive Variable Suspension System

-

LDA System

Existence of lane departure alert system or lane control system

Without or With

Without: w/o Lane Control System

With: w/ Lane Control System

-

PCS System

Existence of pre-collision system

Without or With

Without: w/o Pre-collision System

With: w/ Pre-collision System

-

ICS System

Existence of intelligent clearance sonar system

Without or With

Without: w/o Intelligent Clearance Sonar System

With: w/ Intelligent Clearance Sonar System

-

Radar Cruise System

Existence of dynamic radar cruise control system

Without or With

Without: w/o Dynamic Radar Cruise Control System

With: w/ Dynamic Radar Cruise Control System

-

Intuitive P/A System

Existence of intuitive parking assist system

Without or With

Without: w/o Intuitive Parking Assist System

With: w/ Intuitive Parking Assist System

-

Road Sign Assist System

Existence of road sign assist system

Without or With

Without: w/o Road Sign Assist System

With: w/ Road Sign Assist System

-

HV System Indicator

Hybrid system indicator value

Min.: -101%, Max.: 511% or Unset

Current hybrid system indicator value

for HV Model

ODO Display Time After IG OFF Adjust

Setting of ODO display time after the ignition switch is turned off

30s, 60s, 600s or OFF

Customize setting status displayed

-

Flasher Sound Volume Adjust

Setting of flasher sound volume adjustment

Large, Medium or Small

Customize setting status displayed

-

ECO Drive Indicator Zone Display Function

Setting of the ECO driving indicator

OFF or ON

Customize setting status displayed

-

Reverse Buzzer Setting

Setting of reverse buzzer

Continual or Single

Customize setting status displayed

-

Brake Pad Sensor Signal

Brake pad wear signal

OFF or ON

OFF: Brake pad replacement not necessary

ON: Brake pad replacement necessary

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

Sub Fuel Sender

No. 2 fuel sender gauge assembly

Without or With

Without: w/o No. 2 Fuel Sender Gauge Assembly

With: w/ No. 2 Fuel Sender Gauge Assembly

-

4th Right Seat Buckle / Occupant Detection Warning Switch

Seat belt buckle switch and occupant detection sensor

(for Rear No. 3 right seat)

OFF or ON

OFF: Rear No. 3 seat belt RH fastened or rear No. 3 right seat not occupied

ON: Rear No. 3 seat belt RH unfastened and rear No. 3 right seat occupied

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

4th Left Seat Buckle / Occupant Detection Warning Switch

Seat belt buckle switch and occupant detection sensor

(for Rear No. 3 left seat)

OFF or ON

OFF: Rear No. 3 seat belt LH fastened or rear No. 3 left seat not occupied

ON: Rear No. 3 seat belt LH unfastened and rear No. 3 left seat occupied

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

4th Center Seat Buckle / Occupant Detection Warning Switch

Seat belt buckle switch and occupant detection sensor

(for Rear No. 3 center seat)

OFF or ON

OFF: Rear No. 3 seat belt center fastened or rear No. 3 center seat not occupied

ON: Rear No. 3 seat belt center unfastened and rear No. 3 center seat occupied

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

Steering Heater Indicator

Heated steering wheel indicator light signal

OFF or ON

OFF: Heated steering wheel indicator light off

ON: Heated steering wheel indicator light on

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

Chassis > Brake > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Vehicle Speed

Maximum wheel speed sensor

Min.: 0 km/h (0 mph), Max.: 326.4 km/h (203 mph)

Vehicle stopped: 0 km/h (0 mph)

When driving at constant speed: No large fluctuations

(1) for M20A-FKS

Powertrain > Engine > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Engine Speed

Engine speed

Min.: 0 rpm, Max.: 16383 rpm

600 to 700 rpm: Idling (shift lever in P, engine warmed up and A/C off)

When the crankshaft position sensor is malfunctioning, "Engine Speed" is approximately 0 rpm or varies greatly from the actual engine speed.

(2) for 2ZR-FAE

Powertrain > Engine and ECT > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Engine Speed

Engine speed

Min.: 0 rpm, Max.: 16383 rpm

710 to 810 rpm: Idling

When the crankshaft position sensor is malfunctioning, "Engine Speed" is approximately 0 rpm or varies greatly from the actual engine speed.

ACTIVE TEST

HINT:

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Combination Meter / Active Test.

(e) Perform the Active Test according the display on the Techstream.

NOTICE:

Depending on the vehicle specifications, some of the Active Test items in the following table will not be displayed on the Techstream.

Body Electrical > Combination Meter > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Speedometer Operation (0km/h,0MPH)

Speedometer*1

(0 km/h, 0 mph)

ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Speedometer Operation (40km/h,40MPH)

Speedometer*1

(40 km/h, 40 mph)

ON

  • For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.
  • The value displayed on the speedometer may deviate.

    for Speedometer with Imperial Units for Main Scale

    • Reference 40 (mph):

      39.6 to 42.4

    for Speedometer with Metric Units for Main Scale

    • Reference 40 (km/h):

      38.8 to 43.3

Speedometer Operation (80km/h,80MPH)

Speedometer*1

(80 km/h, 80 mph)

ON

  • For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.
  • The value displayed on the speedometer may deviate.

    for Speedometer with Imperial Units for Main Scale

    • Reference 80 (mph):

      80.3 to 83.5

    for Speedometer with Metric Units for Main Scale

    • Reference 80 (km/h):

      79.4 to 84.4

Speedometer Operation (120km/h,120MPH)

Speedometer*1

(120 km/h, 120 mph)

ON

  • For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.
  • The value displayed on the speedometer may deviate.

    for Speedometer with Imperial Units for Main Scale

    • Reference 120 (mph):

      121.3 to 124.5

    for Speedometer with Metric Units for Main Scale

    • Reference 120 (km/h):

      120.4 to 125.4

Speedometer Operation (160km/h,160MPH)

Speedometer*1

(160 km/h, 160 mph)

ON

  • For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.
  • The value displayed on the speedometer may deviate.

    for Speedometer with Metric Units for Main Scale

    • Reference 160 (km/h):

      161.3 to 166.3

Speedometer Operation (200km/h,200MPH)

Speedometer*1

(200 km/h, 200 mph)

ON

  • For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.
  • The value displayed on the speedometer may deviate.

    for Speedometer with Metric Units for Main Scale

    • Reference 200 (km/h):

      202.3 to 207.3

Speedometer Operation (240km/h,240MPH)

Speedometer*1

(240 km/h, 240 mph)

ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Speedometer Operation (280km/h,280MPH)

Speedometer*1

(280 km/h, 280 mph)

ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Speedometer Operation (320km/h,320MPH)

Speedometer*1

(320 km/h, 320 mph)

ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Speedometer Operation (360km/h,360MPH)

Speedometer*1

(360 km/h, 360 mph)

ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Speedometer Operation (400km/h,400MPH)

Speedometer*1

(400 km/h, 400 mph)

ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

TachoMeter Operation (0rpm)

Tachometer

(0 rpm)

ON

-

TachoMeter Operation (1000rpm)

Tachometer

(1000 rpm)

ON

-

TachoMeter Operation (2000rpm)

Tachometer

(2000 rpm)

ON

-

TachoMeter Operation (3000rpm)

Tachometer

(3000 rpm)

ON

-

TachoMeter Operation (4000rpm)

Tachometer

(4000 rpm)

ON

-

TachoMeter Operation (5000rpm)

Tachometer

(5000 rpm)

ON

-

TachoMeter Operation (6000rpm)

Tachometer

(6000 rpm)

ON

-

TachoMeter Operation (7000rpm)

Tachometer

(7000 rpm)

ON

-

TachoMeter Operation (8000rpm)

Tachometer

(8000 rpm)

ON

-

TachoMeter Operation (9000rpm)

Tachometer

(9000 rpm)

ON

-

TachoMeter Operation (10000rpm)

Tachometer

(10000 rpm)

ON

-

Fuel Gauge Operation (Sender E)

Fuel receiver gauge

(Sender E)

ON

See [Display 1]

Fuel Gauge Operation (Empty)

Fuel receiver gauge

(Empty)

ON

See [Display 1]

Fuel Gauge Operation (Warning)

Fuel receiver gauge

(Warning)

ON

See [Display 1]

Fuel Gauge Operation (1/4)

Fuel receiver gauge

(1/4)

ON

See [Display 1]

Fuel Gauge Operation (1/2)

Fuel receiver gauge

(1/2)

ON

See [Display 1]

Fuel Gauge Operation (3/4)

Fuel receiver gauge

(3/4)

ON

See [Display 1]

Fuel Gauge Operation (Full)

Fuel receiver gauge

(Full)

ON

See [Display 1]

Fuel Gauge Operation (Sender F)

Fuel receiver gauge

(Sender F)

ON

See [Display 1]

Sub Fuel Gauge Operation (Sender E)

Sub Fuel receiver gauge

(Sender E)

ON

-

Sub Fuel Gauge Operation (Empty)

Sub Fuel receiver gauge

(Empty)

ON

-

Sub Fuel Gauge Operation (1/4)

Sub Fuel receiver gauge

(1/4)

ON

-

Sub Fuel Gauge Operation (1/2)

Sub Fuel receiver gauge

(1/2)

ON

-

Sub Fuel Gauge Operation (3/4)

Sub Fuel receiver gauge

(3/4)

ON

-

Sub Fuel Gauge Operation (Full)

Sub Fuel receiver gauge

(Full)

ON

-

Sub Fuel Gauge Operation (Sender F)

Sub Fuel receiver gauge

(Sender F)

ON

-

Water Temperature Meter Operation (50C,122F)

Engine coolant temperature receiver gauge

(50°C, 122°F)

ON

See [Display 2]

Water Temperature Meter Operation (60C,140F)

Engine coolant temperature receiver gauge

(60°C, 140°F)

ON

See [Display 2]

Water Temperature Meter Operation (70C,158F)

Engine coolant temperature receiver gauge

(70°C, 158°F)

ON

See [Display 2]

Water Temperature Meter Operation (80C,176F)

Engine coolant temperature receiver gauge

(80°C, 176°F)

ON

See [Display 2]

Water Temperature Meter Operation (Middle)

Engine coolant temperature receiver gauge

(Middle)

ON

See [Display 2]

Water Temperature Meter Operation (110C,230F)

Engine coolant temperature receiver gauge

(110°C, 230°F)

ON

See [Display 2]

Water Temperature Meter Operation (120C,248F)

Engine coolant temperature receiver gauge

(120°C, 248°F)

ON

See [Display 2]

Water Temperature Meter Operation (127C,260F)

Engine coolant temperature receiver gauge

(127°C, 260°F)

ON

See [Display 2]

Volt Meter Operation (0V)

Voltmeter

(0 V)

ON

-

Volt Meter Operation (3V)

Voltmeter

(3 V)

ON

-

Volt Meter Operation (6V)

Voltmeter

(6 V)

ON

-

Volt Meter Operation (9V)

Voltmeter

(9 V)

ON

-

Volt Meter Operation (12V)

Voltmeter

(12 V)

ON

-

Volt Meter Operation (15V)

Voltmeter

(15 V)

ON

-

Volt Meter Operation (18V)

Voltmeter

(18 V)

ON

-

Oil Pressure Meter Operation (LOW)

Engine oil pressure receiver gauge

(Low)

ON

-

Oil Pressure Meter Operation (1/4)

Engine oil pressure receiver gauge

(1/4)

ON

-

Oil Pressure Meter Operation (1/2)

Engine oil pressure receiver gauge

(1/2)

ON

-

Oil Pressure Meter Operation (3/4)

Engine oil pressure receiver gauge

(3/4)

ON

-

Oil Pressure Meter Operation (HIGH)

Engine oil pressure receiver gauge

(High)

ON

-

HV System Indicator (MIN)

Hybrid system indicator value

(Charge area)

ON

for HV Model

HV System Indicator (-50%)

Hybrid system indicator value

(Charge area)

ON

for HV Model

HV System Indicator (0%)

Hybrid system indicator value

(Eco area)

ON

for HV Model

HV System Indicator (100%)

Hybrid system indicator value

(Eco area)

ON

for HV Model

HV System Indicator (200%)

Hybrid system indicator value

(Power area)

ON

for HV Model

HV System Indicator (300%)

Hybrid system indicator value

(Power area)

ON

for HV Model

HV System Indicator (400%)

Hybrid system indicator value

(Power area)

ON

for HV Model

HV System Indicator (MAX)

Hybrid system indicator value

(Power area)

ON

for HV Model

SOC Gauge (MIN)

Hybrid battery status gauge

(Min.)

ON

for HV Model

SOC Gauge (1/4)

Hybrid battery status gauge

(1/4)

ON

for HV Model

SOC Gauge (1/2)

Hybrid battery status gauge

(1/2)

ON

for HV Model

SOC Gauge (3/4)

Hybrid battery status gauge

(3/4)

ON

for HV Model

SOC Gauge (MAX)

Hybrid battery status gauge

(Max.)

ON

for HV Model

Fuel Gauge Operation for CNG (Sender E)

Fuel receiver gauge (for CNG)

(Sender E)

ON

-

Fuel Gauge Operation for CNG (Empty)

Fuel receiver gauge (for CNG)

(Empty)

ON

-

Fuel Gauge Operation for CNG (Warning)

Fuel receiver gauge (for CNG)

(Warning)

ON

-

Fuel Gauge Operation for CNG (1/4)

Fuel receiver gauge (for CNG)

(1/4)

ON

-

Fuel Gauge Operation for CNG (1/2)

Fuel receiver gauge (for CNG)

(1/2)

ON

-

Fuel Gauge Operation for CNG (3/4)

Fuel receiver gauge (for CNG)

(3/4)

ON

-

Fuel Gauge Operation for CNG (Full)

Fuel receiver gauge (for CNG)

(Full)

ON

-

Fuel Gauge Operation for CNG (Sender F)

Fuel receiver gauge (for CNG)

(Sender F)

ON

-

Buzzer Operation (800Hz, Vol L, W/ Damping)

Combination meter buzzer

  • Frequency: 800Hz
  • Volume: Large
  • Fading tone

ON

-

Buzzer Operation (800Hz, Vol L, W/O Damping)

Combination meter buzzer

  • Frequency: 800Hz
  • Volume: Large
  • Continuous tone

ON

-

Buzzer Operation (800Hz, Vol S, W/ Damping)

Combination meter buzzer

  • Frequency: 800Hz
  • Volume: Small
  • Fading tone

ON

-

Buzzer Operation (800Hz, Vol S, W/O Damping)

Combination meter buzzer

  • Frequency: 800Hz
  • Volume: Small
  • Continuous tone

ON

-

Buzzer Operation (1.6kHz, Vol S, W/O Damping)

Combination meter buzzer

  • Frequency: 1.6kHz
  • Volume: Small
  • Continuous tone

ON

-

Buzzer Operation (2.0kHz, Vol S, W/O Damping)

Combination meter buzzer

  • Frequency: 2.0kHz
  • Volume: Small
  • Continuous tone

ON

-

Buzzer Operation (2.4kHz, Vol L, W/O Damping)

Combination meter buzzer

  • Frequency: 2.4kHz
  • Volume: Large
  • Continuous tone

ON

-

Multi Display All (White)

Multi-information display

(White display)

ON

-

Multi Display Default Screen

Multi-information display

(Default screen)

ON

-

Meter Display (All)

Segment display

(All display)

ON

-

Meter Display (0)

Segment display

(0 display)

ON

-

Meter Display (1)

Segment display

(1 display)

ON

-

Meter Display (2)

Segment display

(2 display)

ON

-

Meter Display (3)

Segment display

(3 display)

ON

-

Meter Display (4)

Segment display

(4 display)

ON

-

Meter Display (5)

Segment display

(5 display)

ON

-

Meter Display (6)

Segment display

(6 display)

ON

-

Meter Display (7)

Segment display

(7 display)

ON

-

Meter Display (8)

Segment display

(8 display)

ON

-

Meter Display (9)

Segment display

(9 display)

ON

-

Fuel Gauge Indicator

Fuel level warning light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

High Beam Indicator

High beam indicator light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Headlamp Indicator

Head indicator light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Taillamp Indicator

Tail indicator light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Front Fog Lamp Indicator

Front fog indicator light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Rear Fog Lamp Indicator

Rear fog indicator light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Automatic High Beam Indicator (Green)

Automatic high beam indicator light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Left Turn Signal Indicator

LH turn indicator light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Right Turn Signal Indicator

RH turn indicator light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Driver Side Seat Belt Warning

Driver or front passenger seat belt warning light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Airbag Warning

SRS warning light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Check Engine Warning

MIL (Check engine warning light)

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Brake Warning

Brake warning light / red (malfunction)

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Park Warning

Parking brake indicator light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

ABS Warning

ABS warning light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

ECB Warning

Brake warning light / yellow (minor malfunction)

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

EPB Auto OFF Indicator

Electric parking brake auto off indicator light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Slip Warning

Slip indicator light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

VSC OFF Indicator

VSC OFF indicator light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Brake Hold Indicator

Brake hold standby indicator light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Hold Indicator

Brake hold operated indicator light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Tire Pressure Warning System Indicator

Tire pressure warning light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

EPS Warning

EPS warning light

(Red)

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

PPS Warning

EPS warning light

(Amber)

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

PCS OFF Warning

PCS warning light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

BSM Indicator

BSM indicator light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

RCTA OFF Indicator

RCTA OFF indicator light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Auxiliary Battery Warning

Charge warning light

OFF or ON

For models that display the measurement item on the multi-information display, the Active Test may not operate or may provide an invalid result.

Speed Signal Input (0)

Vehicle speed test signal input*2

(0 km/h, 0 mph)

ON

-

Speed Signal Input (40)

Vehicle speed test signal input*2

(40 km/h, 40 mph)

ON

The value displayed on the speedometer may deviate.

for Speedometer with Imperial Units for Main Scale

  • Reference 40 (mph):

    39.6 to 42.4

for Speedometer with Metric Units for Main Scale

  • Reference 40 (km/h):

    38.8 to 43.3

Speed Signal Input (80)

Vehicle speed test signal input*2

(80 km/h, 80 mph)

ON

The value displayed on the speedometer may deviate.

for Speedometer with Imperial Units for Main Scale

  • Reference 80 (mph):

    80.3 to 83.5

for Speedometer with Metric Units for Main Scale

  • Reference 80 (km/h):

    79.4 to 84.4

Speed Signal Input (120)

Vehicle speed test signal input*2

(120 km/h, 120 mph)

ON

The value displayed on the speedometer may deviate.

for Speedometer with Imperial Units for Main Scale

  • Reference 120 (mph):

    121.3 to 124.5

for Speedometer with Metric Units for Main Scale

  • Reference 120 (km/h):

    120.4 to 125.4

Speed Signal Input (160)

Vehicle speed test signal input*2

(160 km/h, 160 mph)

ON

The value displayed on the speedometer may deviate.

for Speedometer with Metric Units for Main Scale

  • Reference 160 (km/h):

    161.3 to 166.3

Speed Signal Input (200)

Vehicle speed test signal input*2

(200 km/h, 200 mph)

ON

The value displayed on the speedometer may deviate.

for Speedometer with Metric Units for Main Scale

  • Reference 200 (km/h):

    202.3 to 207.3

Speed Signal Input (240)

Vehicle speed test signal input*2

(240 km/h, 240 mph)

ON

-

Speed Signal Input (280)

Vehicle speed test signal input*2

(280 km/h, 280 mph)

ON

-

Speed Signal Input (320)

Vehicle speed test signal input*2

(320 km/h, 320 mph)

ON

-

Speed Signal Input (360)

Vehicle speed test signal input*2

(360 km/h, 360 mph)

ON

-

Speed Signal Input (400)

Vehicle speed test signal input*2

(400 km/h, 400 mph)

ON

-

ODO/TRIP Change Switch

ODO/TRIP switch (Combination meter assembly)

OFF or ON

-

Trip Reset Switch

Trip reset switch

OFF or ON

-

Multi Display Select Switch

DISP switch

OFF or ON

-

Meter Day Mode Switch

Tail cancel switch

OFF or ON

-

Light Control Switch (UP)

Light control rheostat up switch

OFF or ON

-

Light Control Switch (DOWN)

Light control rheostat down switch

OFF or ON

-

Light Control Switch (Single)

Light control rheostat switch

OFF or ON

-

Timer Switch (H)

Clock (+) switch (Combination meter assembly)

OFF or ON

-

Timer Switch (M)

Clock (-) switch (Combination meter assembly)

OFF or ON

-

Timer Switch (00)

Clock (00) switch (Combination meter assembly)

OFF or ON

-

Timer Switch (Single)

Clock switch (Combination meter assembly)

OFF or ON

-

Multi Switch (Up)

Up switch on steering pad switch

OFF or ON

-

Multi Switch (Down)

Down switch on steering pad switch

OFF or ON

-

Multi Switch (Left)

Left switch on steering pad switch

OFF or ON

-

Multi Switch (Right)

Right switch on steering pad switch

OFF or ON

-

Multi Switch (Enter)

OK switch on steering pad switch

OFF or ON

-

Multi Switch (Back)

Back switch on steering pad switch

OFF or ON

-

Multi Switch (Top)

Top switch on steering pad switch

OFF or ON

-

  • *1: When this Active Test is performed, an operation signal is sent directly to the combination meter assembly to operate the speedometer.
  • *2: When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.

(1) [Display 1]: Fuel Gauge Operation

*A

for 4.2 Inch Type Multi-information Display

*B

for 7 Inch Type Multi-information Display

*a

Fuel Receiver Gauge

*b

Fuel Gauge Operation

(Sender E)

*c

Fuel Gauge Operation

(Empty)

*d

Fuel Gauge Operation

(Warning)

*e

Fuel Gauge Operation

(1/4)

*f

Fuel Gauge Operation

(1/2)

*g

Fuel Gauge Operation

(3/4)

*h

Fuel Gauge Operation

(Full)

*i

Fuel Gauge Operation

(Sender F)

-

-

(2) [Display 2]: Water Temperature Meter Operation

*A

for 4.2 Inch Type Multi-information Display

*B

for 7 Inch Type Multi-information Display

*a

Engine Coolant Temperature Receiver Gauge

-

-

HINT:

Refer to the following table for the specified engine coolant temperature receiver gauge position for each selected value.

Tester Display

engine coolant temperature receiver gauge indication

Water Temperature Meter Operation

(50C, 122F)

Between 1 and 2 is indicated

Water Temperature Meter Operation

(60C, 140F)

Between 2 and 3 is indicated

Water Temperature Meter Operation

(70C, 158F)

Between 3 and 4 is indicated

Water Temperature Meter Operation

(80C, 176F)

Approximately 4 is indicated

Water Temperature Meter Operation

(Middle)

Approximately 4 is indicated

Water Temperature Meter Operation

(110C, 230F)

Between 5 and 6 is indicated

Water Temperature Meter Operation

(120C, 248F)

Approximately 7 is indicated

Water Temperature Meter Operation

(127C, 260F)

Approximately 8 is indicated